Gary, Have you filled-in ALL of your user options??? I just sent out a dummy spot via the K1TTT cluster as:
dx TE1ST 14000.00 Test pse ignore and the spot in my Internet Cluster window of dxbase shows: DX de WA6AXE: 14000.0 TE1ST Test pse ignore 2321Z In your User Options / Internet TAB / Packet Format ... be sure that this has for DX Spot Key DX de Hpe that this helps. 73 Joe wa6axe Gary Senesac AL9A wrote: > Still am confused. Tried a test spot of TE1ST and it comes through as "DX" > without the " de AL9A" indentifier. Can't find any info about a command to > add this to the spot. I thought the generating software, in this case DXB, > would indentify who is sending the spot. > Gary AL9A > > ----- Original Message ----- > From: "Bob Main" <[EMAIL PROTECTED]> > To: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > Sent: May 23, 2005 1:46 PM > Subject: Re: [Dxbase] DX spot > > > >>Gary, check this out >>http://www.ab5k.net/ArcDocs/UserManual/ArcUserManual.htm Also might want >>to visit www.ve7cc.net too. >> >>73s >>Bob >>KB4CL >> >>----- Original Message ----- >>From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> >>To: "DXbase Reflector" <[email protected]> >>Sent: Monday, May 23, 2005 5:05 PM >>Subject: [Dxbase] DX spot >> >> >> >>>Just recently got setup with a DSL connection to the internet and > > FINALLY > >>>am >>>trying to use DX spotting clusters within DXB2006. Just made my first >>>connection to the N5IN cluster yesterday and it seems to work ok. Still >>>trying to figure out all the filter commands, etc. Just tried to send > > my > >>>first DX spot to the cluster and it seemed to work ok, but when I > > checked > >>>the Internet packet window it came through without the DX de AL9A > > comment. > >>>The rest of the spot was there ok. I have the spot field in DXB set to >>>the >>>default of DX de and my call is entered in the callsign field. Is there >>>something else I have to set in DXB or on the cluster to get the leading >>>DX >>>de AL9A comment produced when sending a spot? >>>Gary AL9A >>> >>>______________________________________________________________ >>>Dxbase mailing list >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>Help: http://mailman.qth.net/mmfaq.htm >>>Post: mailto:[email protected] >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > From [EMAIL PROTECTED] Mon May 23 20:10:22 2005 From: [EMAIL PROTECTED] (Gary Senesac AL9A) Date: Mon May 23 20:20:58 2005 Subject: [Dxbase] DX spot References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Joe, I think what I'm seeing in the Internet Cluster window is the outgoing spot, not the return of the spot. I checked the Options and all looks ok. I sent a similar test msg via the N5IN cluster using the DXB spot window - DX TEIST 14000.00 Test msg pse ignore I see this line echoed on the Internet Cluster window, but no matching spot is received. I did a SH/FILTER command and the filters were set to pass k, ve spots, so I did a SET/FILTER command to pass k, kl7, ve spots thinking the lack of a kl7 pass was blocking the test msg. Still don't see the incoming spot. Gary AL9A ----- Original Message ----- From: "Joseph Glockner" <[EMAIL PROTECTED]> To: "Gary Senesac AL9A" <[EMAIL PROTECTED]> Cc: "DXbase Reflector" <[email protected]> Sent: May 23, 2005 3:29 PM Subject: Re: [Dxbase] DX spot > Gary, > > Have you filled-in ALL of your user options??? I just sent > out a dummy spot via the K1TTT cluster as: > > dx TE1ST 14000.00 Test pse ignore > > and the spot in my Internet Cluster window of dxbase shows: > > DX de WA6AXE: 14000.0 TE1ST Test pse ignore 2321Z > > > > In your User Options / Internet TAB / Packet Format ... > be sure that this has for DX Spot Key > > DX de > > > > Hpe that this helps. > > 73 Joe wa6axe > > > Gary Senesac AL9A wrote: > > > Still am confused. Tried a test spot of TE1ST and it comes through as "DX" > > without the " de AL9A" indentifier. Can't find any info about a command to > > add this to the spot. I thought the generating software, in this case DXB, > > would indentify who is sending the spot. > > Gary AL9A > > > > ----- Original Message ----- > > From: "Bob Main" <[EMAIL PROTECTED]> > > To: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > > Sent: May 23, 2005 1:46 PM > > Subject: Re: [Dxbase] DX spot > > > > > > > >>Gary, check this out > >>http://www.ab5k.net/ArcDocs/UserManual/ArcUserManual.htm Also might want > >>to visit www.ve7cc.net too. > >> > >>73s > >>Bob > >>KB4CL > >> > >>----- Original Message ----- > >>From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > >>To: "DXbase Reflector" <[email protected]> > >>Sent: Monday, May 23, 2005 5:05 PM > >>Subject: [Dxbase] DX spot > >> > >> > >> > >>>Just recently got setup with a DSL connection to the internet and > > > > FINALLY > > > >>>am > >>>trying to use DX spotting clusters within DXB2006. Just made my first > >>>connection to the N5IN cluster yesterday and it seems to work ok. Still > >>>trying to figure out all the filter commands, etc. Just tried to send > > > > my > > > >>>first DX spot to the cluster and it seemed to work ok, but when I > > > > checked > > > >>>the Internet packet window it came through without the DX de AL9A > > > > comment. > > > >>>The rest of the spot was there ok. I have the spot field in DXB set to > >>>the > >>>default of DX de and my call is entered in the callsign field. Is there > >>>something else I have to set in DXB or on the cluster to get the leading > >>>DX > >>>de AL9A comment produced when sending a spot? > >>>Gary AL9A > >>> > >>>______________________________________________________________ > >>>Dxbase mailing list > >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase > >>>Help: http://mailman.qth.net/mmfaq.htm > >>>Post: mailto:[email protected] > >> > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > >
