I was test firing with 4x6. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, May 26, 2005 3:07 AM Subject: Dxbase Digest, Vol 13, Issue 29
> Send Dxbase mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.qth.net/mailman/listinfo/dxbase > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Dxbase digest..." > > > Today's Topics: > > 1. VE7CC & DXB spots (Peter Dougherty) > 2. Re: VE7CC & DXB spots (Gary Senesac AL9A) > 3. Re: VE7CC & DXB spots (Jim McDonald) > 4. Re: VE7CC & DXB spots (Jim McDonald) > 5. Feedback on the Log Check.lst file -- Joe wa6axe > (Joseph Glockner) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 25 May 2005 20:21:48 -0400 > From: Peter Dougherty <[EMAIL PROTECTED]> > Subject: [Dxbase] VE7CC & DXB spots > To: [email protected] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii"; format=flowed > > At 20:10 25-05-05, you wrote: > >>Still no go. I changed the User Options/Internet IP Host box to 127.0.0.1 >>localhost ypoxkjlg node, verified that VE7CC ARU configuration is set to >>Telnet on both Port Setup and Logging Program Connection. Not sure about >>setting the login info. All are left at default values or blank. > <snip> >>Connection is via a DSL modem and appears to be running ok. I've rebooted >>both DXB and VE7CC ARU without success. I must still be missing some >>other option. > > AR User uses port 7300 for LAN connections. You need to tell DX Base to > call on 127.0.0.1:7300 > > I've set up my hosts file to include the following line first: > > 127.0.0.1:7300 localhost AR User > > Go into AR User (did you download and install the latest executable?). > Select Configuration, Ports/Logging Program and make sure Node Connection > has TELNET ticked and also Logging Program Connection has TELNET ticked, > then hit APPLY. > > Go into DX Base, in the User Options/Internet and select entry you created > in your hosts file above. Reboot both apps, making sure that "Connect > Interface at Program Startup" is ticked if you're on v2006 and that AR > User > is up and actually connected to the cluster of your choice before > connecting DX Base. It should work at that point. I have AR User come up > at > boot-up just to be sure. > > > > - pjd > > W2IRT > > > > ------------------------------ > > Message: 2 > Date: Wed, 25 May 2005 17:28:17 -0800 > From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > Subject: Re: [Dxbase] VE7CC & DXB spots > To: <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Thanks Peter, you had the magic solution! I had seen in the VE7CC web > pages > about setting localhosts to 127.0.0.1:7300, but being new to this cluster > connection business had forgotten about the HOSTS file. I couldn't figure > out how to get the 7300 port designator added to the list until you > reminded > me that of the proper file. A quick check of the DXB help file even > showed > how to edit the file from within DX2006. I'm now getting spots through > the > VE7CC AR User interface fb. Now to play around with tweaking the pass and > reject filters - very easy to do from the VE7CC program. If I want to > change to a different cluster do I have to shut down and restart DXB, or > just change connections in AR User? Guess I could experiment a bit and > figure that one out. Thanks to for the help. Thanks also to Firebrick > and > Bob KB4CL. Thank goodness for all the great folks on this reflector! > 73, > Gary AL9A > > ----- Original Message ----- > From: "Peter Dougherty" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: May 25, 2005 4:21 PM > Subject: [Dxbase] VE7CC & DXB spots > > >> At 20:10 25-05-05, you wrote: >> >> >Still no go. I changed the User Options/Internet IP Host box to > 127.0.0.1 >> >localhost ypoxkjlg node, verified that VE7CC ARU configuration is set to >> >Telnet on both Port Setup and Logging Program Connection. Not sure >> >about >> >setting the login info. All are left at default values or blank. >> <snip> >> >Connection is via a DSL modem and appears to be running ok. I've > rebooted >> >both DXB and VE7CC ARU without success. I must still be missing some >> >other option. >> >> AR User uses port 7300 for LAN connections. You need to tell DX Base to >> call on 127.0.0.1:7300 >> >> I've set up my hosts file to include the following line first: >> >> 127.0.0.1:7300 localhost AR User >> >> Go into AR User (did you download and install the latest executable?). >> Select Configuration, Ports/Logging Program and make sure Node Connection >> has TELNET ticked and also Logging Program Connection has TELNET ticked, >> then hit APPLY. >> >> Go into DX Base, in the User Options/Internet and select entry you >> created >> in your hosts file above. Reboot both apps, making sure that "Connect >> Interface at Program Startup" is ticked if you're on v2006 and that AR > User >> is up and actually connected to the cluster of your choice before >> connecting DX Base. It should work at that point. I have AR User come up > at >> boot-up just to be sure. >> >> >> >> - pjd >> >> W2IRT >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> > > > > ------------------------------ > > Message: 3 > Date: Wed, 25 May 2005 18:32:00 -0700 > From: "Jim McDonald" <[EMAIL PROTECTED]> > Subject: Re: [Dxbase] VE7CC & DXB spots > To: "Gary Senesac AL9A" <[EMAIL PROTECTED]>, > <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > Gary, > > Just select a different node in the Telnet list of AR-User, and then > connect. If you haven't shut down DXbase, you'll have to close and reopen > the telnet window. > > Jim N7US > > > > ----- Original Message ----- > From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, May 25, 2005 6:28 PM > Subject: Re: [Dxbase] VE7CC & DXB spots > > > Thanks Peter, you had the magic solution! I had seen in the VE7CC web > pages > about setting localhosts to 127.0.0.1:7300, but being new to this cluster > connection business had forgotten about the HOSTS file. I couldn't figure > out how to get the 7300 port designator added to the list until you > reminded > me that of the proper file. A quick check of the DXB help file even > showed > how to edit the file from within DX2006. I'm now getting spots through > the > VE7CC AR User interface fb. Now to play around with tweaking the pass and > reject filters - very easy to do from the VE7CC program. If I want to > change to a different cluster do I have to shut down and restart DXB, or > just change connections in AR User? Guess I could experiment a bit and > figure that one out. Thanks to for the help. Thanks also to Firebrick > and > Bob KB4CL. Thank goodness for all the great folks on this reflector! > 73, > Gary AL9A > > ----- Original Message ----- > From: "Peter Dougherty" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: May 25, 2005 4:21 PM > Subject: [Dxbase] VE7CC & DXB spots > > >> At 20:10 25-05-05, you wrote: >> >> >Still no go. I changed the User Options/Internet IP Host box to > 127.0.0.1 >> >localhost ypoxkjlg node, verified that VE7CC ARU configuration is set to >> >Telnet on both Port Setup and Logging Program Connection. Not sure >> >about >> >setting the login info. All are left at default values or blank. >> <snip> >> >Connection is via a DSL modem and appears to be running ok. I've > rebooted >> >both DXB and VE7CC ARU without success. I must still be missing some >> >other option. >> >> AR User uses port 7300 for LAN connections. You need to tell DX Base to >> call on 127.0.0.1:7300 >> >> I've set up my hosts file to include the following line first: >> >> 127.0.0.1:7300 localhost AR User >> >> Go into AR User (did you download and install the latest executable?). >> Select Configuration, Ports/Logging Program and make sure Node Connection >> has TELNET ticked and also Logging Program Connection has TELNET ticked, >> then hit APPLY. >> >> Go into DX Base, in the User Options/Internet and select entry you >> created >> in your hosts file above. Reboot both apps, making sure that "Connect >> Interface at Program Startup" is ticked if you're on v2006 and that AR > User >> is up and actually connected to the cluster of your choice before >> connecting DX Base. It should work at that point. I have AR User come up > at >> boot-up just to be sure. >> >> >> >> - pjd >> >> W2IRT >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > > > > ------------------------------ > > Message: 4 > Date: Wed, 25 May 2005 19:12:06 -0700 > From: "Jim McDonald" <[EMAIL PROTECTED]> > Subject: Re: [Dxbase] VE7CC & DXB spots > To: "Gary Senesac AL9A" <[EMAIL PROTECTED]>, > <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="iso-8859-1" > > And, under Configuration-->DX Spots, select Expanded Display so the DX > spots > in AR-User line up nicely with the extra info. > > Jim McDonald, N7US > Mesa, Arizona > [EMAIL PROTECTED] > > AR-Cluster node N7US: 145.09 MHz or telnet to n7us.net > > AZ DX Cluster Users' reflector: > http://groups.yahoo.com/group/adxc > > > ----- Original Message ----- > From: "Jim McDonald" <[EMAIL PROTECTED]> > To: "Gary Senesac AL9A" <[EMAIL PROTECTED]>; > <[email protected]> > Sent: Wednesday, May 25, 2005 6:32 PM > Subject: Re: [Dxbase] VE7CC & DXB spots > > > Gary, > > Just select a different node in the Telnet list of AR-User, and then > connect. If you haven't shut down DXbase, you'll have to close and reopen > the telnet window. > > Jim N7US > > > > ----- Original Message ----- > From: "Gary Senesac AL9A" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, May 25, 2005 6:28 PM > Subject: Re: [Dxbase] VE7CC & DXB spots > > > Thanks Peter, you had the magic solution! I had seen in the VE7CC web > pages > about setting localhosts to 127.0.0.1:7300, but being new to this cluster > connection business had forgotten about the HOSTS file. I couldn't figure > out how to get the 7300 port designator added to the list until you > reminded > me that of the proper file. A quick check of the DXB help file even > showed > how to edit the file from within DX2006. I'm now getting spots through > the > VE7CC AR User interface fb. Now to play around with tweaking the pass and > reject filters - very easy to do from the VE7CC program. If I want to > change to a different cluster do I have to shut down and restart DXB, or > just change connections in AR User? Guess I could experiment a bit and > figure that one out. Thanks to for the help. Thanks also to Firebrick > and > Bob KB4CL. Thank goodness for all the great folks on this reflector! > 73, > Gary AL9A > > ----- Original Message ----- > From: "Peter Dougherty" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: May 25, 2005 4:21 PM > Subject: [Dxbase] VE7CC & DXB spots > > >> At 20:10 25-05-05, you wrote: >> >> >Still no go. I changed the User Options/Internet IP Host box to > 127.0.0.1 >> >localhost ypoxkjlg node, verified that VE7CC ARU configuration is set to >> >Telnet on both Port Setup and Logging Program Connection. Not sure >> >about >> >setting the login info. All are left at default values or blank. >> <snip> >> >Connection is via a DSL modem and appears to be running ok. I've > rebooted >> >both DXB and VE7CC ARU without success. I must still be missing some >> >other option. >> >> AR User uses port 7300 for LAN connections. You need to tell DX Base to >> call on 127.0.0.1:7300 >> >> I've set up my hosts file to include the following line first: >> >> 127.0.0.1:7300 localhost AR User >> >> Go into AR User (did you download and install the latest executable?). >> Select Configuration, Ports/Logging Program and make sure Node Connection >> has TELNET ticked and also Logging Program Connection has TELNET ticked, >> then hit APPLY. >> >> Go into DX Base, in the User Options/Internet and select entry you >> created >> in your hosts file above. Reboot both apps, making sure that "Connect >> Interface at Program Startup" is ticked if you're on v2006 and that AR > User >> is up and actually connected to the cluster of your choice before >> connecting DX Base. It should work at that point. I have AR User come up > at >> boot-up just to be sure. >> >> >> >> - pjd >> >> W2IRT >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > > > > ------------------------------ > > Message: 5 > Date: Thu, 26 May 2005 00:02:05 -0500 > From: Joseph Glockner <[EMAIL PROTECTED]> > Subject: [Dxbase] Feedback on the Log Check.lst file -- Joe wa6axe > To: DXBase Reflector <[email protected]> > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii; format=flowed > > To all: > > The other day, I said that I would come back to the > reflector and let you all know what we found with > regards to the Log Check.lst report file that > John KE5RS was having problems with ... > > The report file had "logic" errors that I made when > I created the file ... I have corrected the mistake(s) > and "if" anyone wants a FRESH copy for their DXbase2006, > I will email it to you ... If you do not use this > Log Check.lst file - then no problem - just delete this > email. > > My Tnx to John for his help!! > > 73 Joe wa6axe > > > > ------------------------------ > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > > End of Dxbase Digest, Vol 13, Issue 29 > **************************************
