I know that this was discussed before, but I can not find the reference
and the archives do not appear to be search able. How can I change the
radio default mode from UCW to be LCW when I click on a cw spot?
Radio.ini? Dxbase2006.ini? Thanks.
Jim, W3BG
From [EMAIL PROTECTED] Sun Aug 7 10:20:47 2005
From: [EMAIL PROTECTED] (James C Samuels)
Date: Sun Aug 7 10:22:31 2005
Subject: [Dxbase] LCW Default Mode
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
ve3wej wrote:
>what mode is is lcw????? and ucw??????
>cw spots should be in cw mode, yes??? no???
>or is this for sound card (modulated cw)
>
>
>Dave
>
>----- Original Message -----
>From: "James C Samuels" <[EMAIL PROTECTED]>
>To: <[email protected]>
>Sent: Saturday, August 06, 2005 12:01 AM
>Subject: [Dxbase] LCW Default Mode
>
>
>
>
>>I know that this was discussed before, but I can not find the reference
>>and the archives do not appear to be search able. How can I change the
>>radio default mode from UCW to be LCW when I click on a cw spot?
>>Radio.ini? Dxbase2006.ini? Thanks.
>>Jim, W3BG
>>______________________________________________________________
>>Dxbase mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:[email protected]
>>
>>
>>
>
>
>
>
UCW= CW on the Upper SideBand
LCW= CW on the Lower SideBand
The spots are by frequency and the mode is determined by the bandplan
mapping in DXBase, however, I am unsure of where the code that is sent
to the rig is set-up to default to either UCW or LCW . . . . or maybe it
at the rig level?
From [EMAIL PROTECTED] Tue Aug 9 12:47:22 2005
From: [EMAIL PROTECTED] ([EMAIL PROTECTED])
Date: Tue Aug 9 12:48:11 2005
Subject: [Dxbase] (no subject)
Message-ID: <[EMAIL PROTECTED]>
Hi,
I make a CW serial interface, I using this interface with other software,
and I want to use with a DX base 2006, I use a DTR PIN, but doesn?t work!!
On circuit I use a 4N35, a one diode, and one resistor
.
Best 73 de IZ7AUH Frank
Francesco Giacoia, IZ7AUH
Strange Radio Team
www.strangeradioteam.com
[EMAIL PROTECTED]
From [EMAIL PROTECTED] Wed Aug 10 23:57:37 2005
From: [EMAIL PROTECTED] (Eric - VE3GSI)
Date: Wed Aug 10 23:58:30 2005
Subject: [Dxbase] DXBase 2006 + WinKey via micro KEYER
Message-ID: <[EMAIL PROTECTED]>
Hi Gang,
It seems that DXBase 2006 will not work with WinKey v.10 in the micro KEYER
by microHAM. I have no problems making this hardware work with another
logging program.
Does anyone know why I can not get DXBase to work with this product? Has
anyone come up with a work-around?
Regards,
Eric - VE3GSI
From [EMAIL PROTECTED] Thu Aug 11 07:08:46 2005
From: [EMAIL PROTECTED] (Chuck Guenther)
Date: Thu Aug 11 07:09:53 2005
Subject: [Dxbase] DXBase 2006 + WinKey via micro KEYER
Message-ID: <[EMAIL PROTECTED]>
Eric,
I'm using DXBase 2006 with the microHam keyer with the latest (V. 2.0) router
software and firmware upgrades. I believe my keyer has the v. 9 K1EL keyer
chip in it. Works great with the Omni 6 here for CW.
I wonder if you have external power (13.8V) hooked up to your microKeyer?
73,
Chuck NI0C
