It's already happened from back in 1996 K7C was operating as a UTAH
sesquecential sta. I mapped him to KH7K but until I removed the UTAH from
the state col. they still showed as USA. Of course you can easily do
individual prefix corrections but since this is a DX logging program I
mapped them to Kure.
Sandy W4DUP
----- Original Message -----
From: "Philip Snyder" <[EMAIL PROTECTED]>
To: "FireBrick" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Tuesday, October 04, 2005 5:47 PM
Subject: Re: [Dxbase] k7c says USA
> It may never happen, but wouldn't it be better to just change the prefix
> for each qso (as if many at least in the Midwest have more than one or
> two) rather than change it in the database? There is always the chance
> that K7C will be issued for some other event or dxpedition and then when
> you work the Annual Mount St. Helens special event station they may have
> K7C as a special call. I'm sure someone can (and will) let me know if I
> am all wet on this one.
>
> Phil
> N9LAH
>
>
> FireBrick wrote:
>
>> This comes up quite frequently
>> Enter the call normally, cursor over to the Prefix column, then scroll
>> through the selections till you find kh7k
>> cursor out
>> you will be asked if you want to map k7c to kh7k
>> yes
>> and from then on....all the K7C entries will automagically be logged
>> as Kure.
>>
>> ----- Original Message ----- From: "Greg" <[EMAIL PROTECTED]>
>> To: <[email protected]>
>> Sent: Tuesday, October 04, 2005 4:29 PM
>> Subject: [Dxbase] k7c says USA
>>
>>
>>>
>>> how do i change it ?
>>> i done it a long time ago but do not remember
>>>
>>> tnx Greg N8TDL
>>>
>>>
>>> ______________________________________________________________
>>> Dxbase mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[email protected]
>>>
>>
>>
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
>>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
From [EMAIL PROTECTED] Tue Oct 4 22:30:36 2005
From: [EMAIL PROTECTED] (FireBrick)
Date: Tue Oct 4 22:41:04 2005
Subject: [Dxbase] k7c says USA
References: <[EMAIL PROTECTED]><[EMAIL PROTECTED]><[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Well so much for my theory that licenses were valid for 10 years. hihi
unless it was issued far enough in advance of the Utah Sequi.
Maybe that rule doesn't apply to SE's.
I have no experience in this so better shut up.
----- Original Message -----
From: "Sanford Ardern" <[EMAIL PROTECTED]>
To: "DXbase Reflector" <[email protected]>
Sent: Tuesday, October 04, 2005 9:24 PM
Subject: Re: [Dxbase] k7c says USA
> It's already happened from back in 1996 K7C was operating as a UTAH
> sesquecential sta. I mapped him to KH7K but until I removed the UTAH from
> the state col. they still showed as USA. Of course you can easily do
> individual prefix corrections but since this is a DX logging program I
> mapped them to Kure.
>
> Sandy W4DUP
>
>
> ----- Original Message -----
> From: "Philip Snyder" <[EMAIL PROTECTED]>
> To: "FireBrick" <[EMAIL PROTECTED]>
> Cc: <[email protected]>
> Sent: Tuesday, October 04, 2005 5:47 PM
> Subject: Re: [Dxbase] k7c says USA
>
>
>> It may never happen, but wouldn't it be better to just change the prefix
>> for each qso (as if many at least in the Midwest have more than one or
>> two) rather than change it in the database? There is always the chance
>> that K7C will be issued for some other event or dxpedition and then when
>> you work the Annual Mount St. Helens special event station they may have
>> K7C as a special call. I'm sure someone can (and will) let me know if I
>> am all wet on this one.
>>
>> Phil
>> N9LAH
>>
>>
>> FireBrick wrote:
>>
>>> This comes up quite frequently
>>> Enter the call normally, cursor over to the Prefix column, then scroll
>>> through the selections till you find kh7k
>>> cursor out
>>> you will be asked if you want to map k7c to kh7k
>>> yes
>>> and from then on....all the K7C entries will automagically be logged
>>> as Kure.
>>>
>>> ----- Original Message ----- From: "Greg" <[EMAIL PROTECTED]>
>>> To: <[email protected]>
>>> Sent: Tuesday, October 04, 2005 4:29 PM
>>> Subject: [Dxbase] k7c says USA
>>>
>>>
>>>>
>>>> how do i change it ?
>>>> i done it a long time ago but do not remember
>>>>
>>>> tnx Greg N8TDL
>>>>
>>>>
>>>> ______________________________________________________________
>>>> Dxbase mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:[email protected]
>>>>
>>>
>>>
>>> ______________________________________________________________
>>> Dxbase mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[email protected]
>>>
>>>
>> ______________________________________________________________
>> Dxbase mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dxbase
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[email protected]
>>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
