I sent Tony and email directly late last night, and asked him if he was using a Callbook CD. I am awaiting his answer.
If he is using a Callbook CD lookup, then the fact that he manually updated the Call Map table to include LU1ZD recently is mute - since the CD's information is what will be used - regardless of what is in the Call Map table. I looked at my Flying horse CD and they have LU1ZD listed as VP8O.. I am thinking that the CD Tony is using might have the same thing. 73 Joe wa6axe ?ystein Stokkeland wrote: > Hi, LU1ZD is not specified in the Call Map in DXbase 2006. If it is in the > Call Map, it has been entered after installation, manually. Thereby the > Alias Map is used where LU1Z maps this to VP8O. > > > > > 73 de > > ?ystein Stokkeland LA7QI > Tel: +47 51 67 70 97 / +47 971 56 090 > email: [EMAIL PROTECTED] > > *****Representant i Norge for DXbase logging program***** > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Joseph Glockner > Sent: 21. desember 2005 08:09 > To: Tony Cash > Cc: dxbase > Subject: Re: [Dxbase] LU1Z mapped wrong > > Tony, > > If I type ONLY LU1Z and then tab .. yes, I get VP8O .. that is because of > the Alias Map entry (which is correct) ... BUT, when > I type-in the Full Call of LU1ZD I get KC4 (which is drawn > from the Call Map).. > > Joe wa6axe > > Tony Cash wrote: > > >>My Call Map also has LU1ZD listed as KC4 BUT when I try to log this >>callsign it logs as South Orkney Is. >> >>73 de Tony, KD4K >>My Radio web site >>http://home.adelphia.net/~tonycash/kd4k/radio.html >>My Weather Web Site >>http://home.adelphia.net/~tonycash >>Sawnee Mountain Repeater Web Site >>http://www.sawneemtn.org/ >> >> >>----- Original Message ----- From: "Joseph Glockner" >><[EMAIL PROTECTED]> >>To: "Bob Main" <[EMAIL PROTECTED]> >>Cc: "DXBase" <[email protected]> >>Sent: Tuesday, December 20, 2005 12:46 PM >>Subject: Re: [Dxbase] LU1Z mapped wrong >> >> >> >>>Bob, >>> >>>When it comes to Antarctica Bases/Station, such as LU1ZD, the entry >>>in the Alias Map is all ok!! LU1ZA is truely VP8O entity and that is >>>alphabetically the first one.. >>> >>>In these cases, it is MUCH better to leave the Alias Map alone - and >>>strictly make the FULL CALLSIGN entries into the Call Map table ... >>> >>>Here are the Call Map entries (at least some of them for Argentine >>>Antarctica Stations: >>> >>> >>>LU1ZA - VP8O >>> >>>LU1ZB - KC4 >>> >>>LU1ZC - VP8H >>> >>>LU1ZD - KC4 >>> >>>LU1ZI - VP8H >>> >>>LU1ZG - KC4 >>> >>>LU1ZV - KC4 >>> >>>LU2ZD - KC4 >>> >>>LU4ZS - KC4 >>> >>> >>> >>> >>>73 Joe wa6axe >>> >>>Bob Main wrote: >>> >>> >>>>I worked LU1ZD the other night and DXBase 2006 was saying that it >>>>was >>>>VP8 - >>>>South Orkney Is. This would give me a new one. Last night I was >>>>listening to the net, ran by the QSL Manager and finally realized >>>>that the station is really in Anarcticitia which I already have. So >>>>I checked and the mapping the mapping has LU1Z = VP8, which is >>>>wrong, so you may want to check yours because I don't remember >>>>changing this one in the prefix mapping. >>>> >>>>Bob >>>> >>>>______________________________________________________________ >>>>Dxbase mailing list >>>>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>Help: http://mailman.qth.net/mmfaq.htm >>>>Post: mailto:[email protected] >>>> >>>> >>> >>>______________________________________________________________ >>>Dxbase mailing list >>>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>Help: http://mailman.qth.net/mmfaq.htm >>>Post: mailto:[email protected] >>> >>> >>>-- >>>No virus found in this incoming message. >>>Checked by AVG Free Edition. >>>Version: 7.1.371 / Virus Database: 267.14.1/206 - Release Date: >>>12/16/2005 >>> >>> >> >>______________________________________________________________ >>Dxbase mailing list >>Home: http://mailman.qth.net/mailman/listinfo/dxbase >>Help: http://mailman.qth.net/mmfaq.htm >>Post: mailto:[email protected] >> >> > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.371 / Virus Database: 267.14.2/208 - Release Date: 20.12.2005 > > From [EMAIL PROTECTED] Wed Dec 21 13:24:26 2005 From: [EMAIL PROTECTED] (Joseph Glockner) Date: Wed Dec 21 13:24:56 2005 Subject: [Dxbase] LU1Z mapped wrong In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Ignore my last email!! I am loosing it - HI!! The CD shud have no control over the country/entity assignment. Only control the QTH/County, etc ... Tony, did you resolve the problem yet? 73 Joe wa6axe Joseph Glockner wrote: > I sent Tony and email directly late last night, and asked > him if he was using a Callbook CD. I am awaiting his answer. > > If he is using a Callbook CD lookup, then the fact that he > manually updated the Call Map table to include LU1ZD recently > is mute - since the CD's information is what will be used - > regardless of what is in the Call Map table. > > I looked at my Flying horse CD and they have LU1ZD listed as > VP8O.. I am thinking that the CD Tony is using might have the same > thing. > > 73 Joe wa6axe > > ?ystein Stokkeland wrote: > >> Hi, LU1ZD is not specified in the Call Map in DXbase 2006. If it is >> in the >> Call Map, it has been entered after installation, manually. Thereby the >> Alias Map is used where LU1Z maps this to VP8O. >> >> >> >> >> 73 de >> >> ?ystein Stokkeland LA7QI >> Tel: +47 51 67 70 97 / +47 971 56 090 >> email: [EMAIL PROTECTED] >> >> *****Representant i Norge for DXbase logging program***** >> >> >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] >> On Behalf Of Joseph Glockner >> Sent: 21. desember 2005 08:09 >> To: Tony Cash >> Cc: dxbase >> Subject: Re: [Dxbase] LU1Z mapped wrong >> >> Tony, >> >> If I type ONLY LU1Z and then tab .. yes, I get VP8O .. that is >> because of >> the Alias Map entry (which is correct) ... BUT, when >> I type-in the Full Call of LU1ZD I get KC4 (which is drawn >> from the Call Map).. >> >> Joe wa6axe >> >> Tony Cash wrote: >> >> >>> My Call Map also has LU1ZD listed as KC4 BUT when I try to log this >>> callsign it logs as South Orkney Is. >>> >>> 73 de Tony, KD4K >>> My Radio web site >>> http://home.adelphia.net/~tonycash/kd4k/radio.html >>> My Weather Web Site >>> http://home.adelphia.net/~tonycash >>> Sawnee Mountain Repeater Web Site >>> http://www.sawneemtn.org/ >>> >>> >>> ----- Original Message ----- From: "Joseph Glockner" >>> <[EMAIL PROTECTED]> >>> To: "Bob Main" <[EMAIL PROTECTED]> >>> Cc: "DXBase" <[email protected]> >>> Sent: Tuesday, December 20, 2005 12:46 PM >>> Subject: Re: [Dxbase] LU1Z mapped wrong >>> >>> >>> >>>> Bob, >>>> >>>> When it comes to Antarctica Bases/Station, such as LU1ZD, the entry >>>> in the Alias Map is all ok!! LU1ZA is truely VP8O entity and that is >>>> alphabetically the first one.. >>>> >>>> In these cases, it is MUCH better to leave the Alias Map alone - and >>>> strictly make the FULL CALLSIGN entries into the Call Map table ... >>>> >>>> Here are the Call Map entries (at least some of them for Argentine >>>> Antarctica Stations: >>>> >>>> >>>> LU1ZA - VP8O >>>> >>>> LU1ZB - KC4 >>>> >>>> LU1ZC - VP8H >>>> >>>> LU1ZD - KC4 >>>> >>>> LU1ZI - VP8H >>>> >>>> LU1ZG - KC4 >>>> >>>> LU1ZV - KC4 >>>> >>>> LU2ZD - KC4 >>>> >>>> LU4ZS - KC4 >>>> >>>> >>>> >>>> >>>> 73 Joe wa6axe >>>> >>>> Bob Main wrote: >>>> >>>> >>>>> I worked LU1ZD the other night and DXBase 2006 was saying that it was >>>>> VP8 - >>>>> South Orkney Is. This would give me a new one. Last night I was >>>>> listening to the net, ran by the QSL Manager and finally realized >>>>> that the station is really in Anarcticitia which I already have. >>>>> So I checked and the mapping the mapping has LU1Z = VP8, which is >>>>> wrong, so you may want to check yours because I don't remember >>>>> changing this one in the prefix mapping. >>>>> >>>>> Bob >>>>> >>>>> ______________________________________________________________ >>>>> Dxbase mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:[email protected] >>>>> >>>>> >>>> >>>> ______________________________________________________________ >>>> Dxbase mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[email protected] >>>> >>>> >>>> -- >>>> No virus found in this incoming message. >>>> Checked by AVG Free Edition. >>>> Version: 7.1.371 / Virus Database: 267.14.1/206 - Release Date: >>>> 12/16/2005 >>>> >>>> >>> >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> >> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> -- >> No virus found in this incoming message. >> Checked by AVG Free Edition. >> Version: 7.1.371 / Virus Database: 267.14.2/208 - Release Date: >> 20.12.2005 >> >> > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > From [EMAIL PROTECTED] Wed Dec 21 14:30:47 2005 From: [EMAIL PROTECTED] (Tony Cash) Date: Wed Dec 21 14:31:21 2005 Subject: [Dxbase] LU1Z mapped wrong References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> No, I have not yet resolved the problem. Yes, I am using the RAC callbook CD. I will check it after while and see if anything changes without the callbook running. 73 de Tony, KD4K My Radio web site http://home.adelphia.net/~tonycash/kd4k/radio.html My Weather Web Site http://home.adelphia.net/~tonycash Sawnee Mountain Repeater Web Site http://www.sawneemtn.org/ ----- Original Message ----- From: "Joseph Glockner" <[EMAIL PROTECTED]> To: "'Tony Cash'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; "'dxbase'" <[email protected]> Sent: Wednesday, December 21, 2005 1:24 PM Subject: Re: [Dxbase] LU1Z mapped wrong > Ignore my last email!! I am loosing it - HI!! The CD > shud have no control over the country/entity assignment. > Only control the QTH/County, etc ... Tony, did you > resolve the problem yet? > > 73 Joe wa6axe > > > Joseph Glockner wrote: > >> I sent Tony and email directly late last night, and asked >> him if he was using a Callbook CD. I am awaiting his answer. >> >> If he is using a Callbook CD lookup, then the fact that he >> manually updated the Call Map table to include LU1ZD recently >> is mute - since the CD's information is what will be used - >> regardless of what is in the Call Map table. >> >> I looked at my Flying horse CD and they have LU1ZD listed as >> VP8O.. I am thinking that the CD Tony is using might have the same >> thing. >> >> 73 Joe wa6axe >> >> ?ystein Stokkeland wrote: >> >>> Hi, LU1ZD is not specified in the Call Map in DXbase 2006. If it is in >>> the >>> Call Map, it has been entered after installation, manually. Thereby the >>> Alias Map is used where LU1Z maps this to VP8O. >>> >>> >>> 73 de >>> >>> ?ystein Stokkeland LA7QI >>> Tel: +47 51 67 70 97 / +47 971 56 090 >>> email: [EMAIL PROTECTED] >>> >>> *****Representant i Norge for DXbase logging program***** >>> >>> >>> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] >>> [mailto:[EMAIL PROTECTED] >>> On Behalf Of Joseph Glockner >>> Sent: 21. desember 2005 08:09 >>> To: Tony Cash >>> Cc: dxbase >>> Subject: Re: [Dxbase] LU1Z mapped wrong >>> >>> Tony, >>> >>> If I type ONLY LU1Z and then tab .. yes, I get VP8O .. that is because >>> of >>> the Alias Map entry (which is correct) ... BUT, when >>> I type-in the Full Call of LU1ZD I get KC4 (which is drawn >>> from the Call Map).. >>> >>> Joe wa6axe >>> >>> Tony Cash wrote: >>> >>> >>>> My Call Map also has LU1ZD listed as KC4 BUT when I try to log this >>>> callsign it logs as South Orkney Is. >>>> >>>> 73 de Tony, KD4K >>>> My Radio web site >>>> http://home.adelphia.net/~tonycash/kd4k/radio.html >>>> My Weather Web Site >>>> http://home.adelphia.net/~tonycash >>>> Sawnee Mountain Repeater Web Site >>>> http://www.sawneemtn.org/ >>>> >>>> >>>> ----- Original Message ----- From: "Joseph Glockner" >>>> <[EMAIL PROTECTED]> >>>> To: "Bob Main" <[EMAIL PROTECTED]> >>>> Cc: "DXBase" <[email protected]> >>>> Sent: Tuesday, December 20, 2005 12:46 PM >>>> Subject: Re: [Dxbase] LU1Z mapped wrong >>>> >>>> >>>> >>>>> Bob, >>>>> >>>>> When it comes to Antarctica Bases/Station, such as LU1ZD, the entry in >>>>> the Alias Map is all ok!! LU1ZA is truely VP8O entity and that is >>>>> alphabetically the first one.. >>>>> >>>>> In these cases, it is MUCH better to leave the Alias Map alone - and >>>>> strictly make the FULL CALLSIGN entries into the Call Map table ... >>>>> >>>>> Here are the Call Map entries (at least some of them for Argentine >>>>> Antarctica Stations: >>>>> >>>>> >>>>> LU1ZA - VP8O >>>>> >>>>> LU1ZB - KC4 >>>>> >>>>> LU1ZC - VP8H >>>>> >>>>> LU1ZD - KC4 >>>>> >>>>> LU1ZI - VP8H >>>>> >>>>> LU1ZG - KC4 >>>>> >>>>> LU1ZV - KC4 >>>>> >>>>> LU2ZD - KC4 >>>>> >>>>> LU4ZS - KC4 >>>>> >>>>> >>>>> >>>>> >>>>> 73 Joe wa6axe >>>>> >>>>> Bob Main wrote: >>>>> >>>>> >>>>>> I worked LU1ZD the other night and DXBase 2006 was saying that it was >>>>>> VP8 - >>>>>> South Orkney Is. This would give me a new one. Last night I was >>>>>> listening to the net, ran by the QSL Manager and finally realized >>>>>> that the station is really in Anarcticitia which I already have. So >>>>>> I checked and the mapping the mapping has LU1Z = VP8, which is wrong, >>>>>> so you may want to check yours because I don't remember changing this >>>>>> one in the prefix mapping. >>>>>> >>>>>> Bob >>>>>> >>>>>> ______________________________________________________________ >>>>>> Dxbase mailing list >>>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>> Post: mailto:[email protected] >>>>>> >>>>>> >>>>> >>>>> ______________________________________________________________ >>>>> Dxbase mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:[email protected] >>>>> >>>>> >>>>> -- >>>>> No virus found in this incoming message. >>>>> Checked by AVG Free Edition. >>>>> Version: 7.1.371 / Virus Database: 267.14.1/206 - Release Date: >>>>> 12/16/2005 >>>>> >>>>> >>>> >>>> ______________________________________________________________ >>>> Dxbase mailing list >>>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>>> Help: http://mailman.qth.net/mmfaq.htm >>>> Post: mailto:[email protected] >>>> >>>> >>> >>> ______________________________________________________________ >>> Dxbase mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/dxbase >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> -- >>> No virus found in this incoming message. >>> Checked by AVG Free Edition. >>> Version: 7.1.371 / Virus Database: 267.14.2/208 - Release Date: >>> 20.12.2005 >>> >> ______________________________________________________________ >> Dxbase mailing list >> Home: http://mailman.qth.net/mailman/listinfo/dxbase >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.371 / Virus Database: 267.14.1/207 - Release Date: 12/19/2005 > >
