Hi guys, I am looking for a SWL label format for Avery 5160 Label Stock,
it is 3 rows of ten.
The SWL formats in labels are all for 2 row. I am sure that was a
template for Avery 5160 as I know I sent some out but it was a long time
ago.
I got a SWL card with a SAE and a IRC! So I guess he really needed
Missouri.
Thanks
Joe K0BX
From [EMAIL PROTECTED] Sun Mar 12 22:57:21 2006
From: [EMAIL PROTECTED] (Gary Senesac AL9A)
Date: Sun Mar 12 22:59:42 2006
Subject: [Dxbase] OPRCALL field for a temp operation
References: <[EMAIL PROTECTED]><[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
Pete,
Have you already got the C6 qso's in the log, either by entry or by import?
ASSUMING the qso's are already there showing W2IRT in the OPRCALL field AND
you have the correct license approval from Jack AND you don't have Access 97
available to edit them I would do the following:
1. Note the first and last log entries from the C6 operation - by QSO
record number or date.
2. Go the first log entry of the C6 qso's and put the cursor in the OPRCALL
field. Click on Find/Replace and change the OPRCALL from W2IRT to W2IRT/CT
and select replace all.
3. This action will replace ALL W2IRT OPRCALL's in the log with W2IRT/C6.
Once completed go to the first log entry after the last C6 qso and do
another Find/Replace operation. This time, change all the W2IRT/C6
OPRCALL's back to W2IRT.
This will only work if you have no other OPRCALL's with W2IRT/???. If you
do, forget the above as it will do mucho damage to the other portable calls.
If you do perform this Find and Replace operation it will only work for this
operation. Next time you enter or import portable operations the call used
must be correct or you will have to get Access 97 up and running.
Gary AL9A
----- Original Message -----
From: "Peter Dougherty (W2IRT)" <[EMAIL PROTECTED]>
To: "FireBrick" <[EMAIL PROTECTED]>; <[email protected]>
Sent: March 12, 2006 11:53 AM
Subject: Re: [Dxbase] OPRCALL field for a temp operation
> At 13:02 03/12/06, FireBrick wrote:
>
> >Pete
> >Are you trying to combine your C6 log with your W2IRT log?
> >
> >I would think it would be better to import your C6 log into the
Virgin.mdb.
> >They are two distinct award entities and qso's are not interchangeable.
>
> Heavens no :-)
> I just want the C6 log to have W2IRT/C6A in the oprcall field (and
> ditto for any future operation I embark upon), so I can use my
> fantastic label template to say "W2IRT/C6A confirms ....etc.
>
> I think I now see how to do it for future ops, but any way to change
> all my Q's from last week to this value (I don't have Access '97
> working on this machine)?
>
>
>
>
> - Peter
>
> W2IRT
>
> ______________________________________________________________
> Dxbase mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dxbase
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
