Allan, Once with my FT-1000MP and computer running MTTY, I got a single tone on RTTY. It took me a while to figure it out but I eventually concluded that it was RF coupling that was taking place as I had moved my cables around on the back of the equipment. It had never done it before. It did not happen with the 1500 W. amplifier off.
I placed two turns through a snap on ferrite on the RTTY cable which ran between my RTTY interface box and the FT-1000MP and it went away. Obviously your mileage will vary! Ernie KS4Q The KS4Q AR-Cluster: dx.ks4q.net ----- Original Message ----- From: [EMAIL PROTECTED] To: <[email protected]> Sent: Sun, 3 Sep 2006 12:44:40 -0400 Subject: [Dxbase] Off topic also-AEA Pakratt-II Can anyone help with this problem Re AEA PC-Pakratt-II PK 232MBX I was operating RTTY and all of a sudden I was only transmitting a single tone that wasn't modulated. I can receive fine and the transmit buffer works, but when I press F3 to transmit I only transmit a CW tone even the the transmiited characters are being sent on the screen. I tried it in the Morse Code mode and the same thing happens. Obviously the connection to tjhe computer is still good as well as the connection from the TNC. Does anyone have any thoughts? Much appreciated Thanks Allan W2TN ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
