anyone that needs the radio ini file to make your ft2000 work with dx base send me a e mail and i will send you the ini file ray nr1r From [EMAIL PROTECTED] Fri Dec 15 15:04:29 2006 From: [EMAIL PROTECTED] (Art Holmes) Date: Fri Dec 15 15:07:59 2006 Subject: [Dxbase] frequency readout Message-ID: <[EMAIL PROTECTED]>
Hello dxbasers, I have a cockpit problem! I am unable to get the correct frequency readout from the rig. It always comes up frequency 365416.5 and band 75gh. It has worked in the past. I have n1mm logger for contesting and it works fine. The setup: Rig icom 756pro2 the rig is selected with addr of 64h Interface via ct17 1200 n 81 dtr cts on com 3 same with n1nn Load band/mode from transceiver is set The mode readout is correct just frequency wrong The rig will set the xcvr freq via spot correctly Under radio 1 connect hf radio serial is set The default band is set at 2 When the 756pro2 is powered off the 2 m default is set correctly There is a 2nd rig an ft736r but it is not connected via rs232 In the log page you can suspend the radio use, that is not set Any ideas.? Thanks art w1rzf
