<< no problem retrieving information from the rig What does this mean? With what program?
<< when I switch to dxbase 2007, I get nothing Be sure to check the wiring of your circuit to see how the CI-V gets it's power. Many get power from the RS-232 handshake pins. Once you've found out which one, play with DTR High, CTS High etc, settings under Tools --> Options --> User Options --> Radio1. Also be sure to check "Connect HF1 Radio 1 Interface" Michael K3KH -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Esteban Romagni Sent: Sunday, December 24, 2006 11:01 AM To: [email protected] Subject: [Dxbase] Icom radio control and DXBASE 2007 Hello all, I made over the weekend a new civ interface (from the AA8DX article in Feb 1993 QST); when I use N1MM, no problem retrieving information from the rig, when I switch to dxbase 2007, I get nothing (using icom 756PRO III, 1200 baud, dtr high, word l. 0, parity none, stop bits 2.) When I do a quick test under tools, set hf frequency, if I spin the dial and do retrieve, I get info (the wrong info at times). My settings in the rig are baud 1200, civ address 5ch. Is there is anything I should tweak inside radio.ini? Any suggestions are welcome... Steve W4DTA ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
