Bill, The symptom you describe could be caused by a couple of issues. Your video has become corrupted in some way and you need to reinstall your video driver. Or, one or more of the DXbase .dll files that control the screen presentations has become corrupted in some way. To resolve the DXbase files, refer to the help file for Install and Uninstall DXbase, in the sub section called reinstalling DXbase. Be sure you safeguard your .mdb files by copying them to a safe place in a folder outside of DXbase.
Regards, Jack ----- Original Message ----- From: +ACI-bill morgan+ACI- +ADw-billmorgan+AEA-wildblue.net+AD4- To: +ACI-DXBase Reflector+ACI- +ADw-dxbase+AEA-mailman.qth.net+AD4- Sent: Thursday, May 01, 2008 4:42 PM Subject: +AFs-Dxbase+AF0- HELP REQUEST When I started DXBase this afternoon the QSO log window does not show any entries. The window is on the screen with QSO Log for K0DEQ.mdb at the top but there are no entries shown. At the left side of the window there is a column of rectangular boxes with nothing in any of the boxes. The remainder of the window is blank. AT the bottom in its usual location is:: Record 76242 - and when I initialize the tables the screen reports reading 76240 QSOs so I assume all of the QSOs are in there somewhere. I have restarted Dxbase several times and initialized tables several times with no change in the QSO log window. Any suggestions please? Thank you Bill, K0DEQ +AF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXwBfAF8AXw- Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase+AEA-mailman.qth.net
