Jim, As Joe already mentioned, there are no options for this. If your radio is in split mode and is supported through the RS232 interface so we can read it, then VFOb is placed in the notes field and other notes can be added up to max length of the notes field.
Regards, Jack ----- Original Message ----- From: "Jim Spears" <[email protected]> To: <[email protected]> Sent: Wednesday, January 07, 2009 5:38 PM Subject: [Dxbase] K3 interface >I have a new K3 on line and operational (S/N 2295). All works well through > the MicroHam MK2 with one annoyance. > > > > When I log a qso and am operating split, VFO A freq goes into the > "Frequency" field as desired since this is my receive frequency and the > other station's transmit frequency. The thing I don't like is VFO B freq > goes into the "Notes" field. I use this for other purposes. > > > > If I am not operating split then VFO B freq does not get stored anywhere > that I have noticed. > > > > If DXbase wants to save VFO B somewhere, how do I tell it to save the freq > in some other field than Notes? > > > > Jim > > N1NK > > -------------------------------------------------------------------------------- > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
