Jack, Okay, thanks for the answer. Neal can add it to his list of things to look at. The N1MM contest program controls the Winkeyer very nicely. It switches between the two rigs automatically. The paddles are still active and if you are sending a buffer from the N1MM program and hit the paddle the sending from the program stops. Which is very nice.
73 Tom, N4TL > [Original Message] > From: Jack <[email protected]> > To: <[email protected]>; dxbase <[email protected]> > Date: 10/10/2009 10:51:18 AM > Subject: Re: [Dxbase] K1EL Winkeyer USB > > Tom, > > The ICONs for switching between radio1 and radio2 only control which radio > is accessed when retrieving or sending frequency/mode info. It has nothing > to do with the keyer interface. There is nothing in DXbase that switches > the Winkey between two different radios. Perhaps there is a manual switch > on the Winkey that lets you direct the keying between different radios, I > don't really know. But as far as DXbase is concerned, the keying is sent > from DXbase to the Winkey and where it goes after that is controlled in > Winkey. > > Regards, > Jack > > ----- Original Message ----- > From: "Tom Lewis" <[email protected]> > To: "dxbase" <[email protected]> > Sent: Saturday, October 10, 2009 7:30 AM > Subject: [Dxbase] K1EL Winkeyer USB > > > > > > I added a K1EL Winkeyer USB to my station. In stand alone mode it keys > > radio one or two fine. > > > > With DXbase 2007 I can't get it to change between radios. The "Use Radio > > 2" > > icon up or down does not matter. > > > > Does anyone know how to get it to switch between radios? > > > > Thanks > > Tom, N4TL > > > > > > > > > > ______________________________________________________________ > > Dxbase mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dxbase > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
