Im using MMVARI for psk.. It works well and it along with MMTTY and Joes program are the only ones I can get to work my comports on my computer with the extfsk port driver thats available with those programs.. But they both work great. I run FSK with the proIII for RTTY and although psk is audio I have it wired to the accessory port on the back of the proIII and the biggest thing to remember with psk is dont push it over the alc limit. I actually leave my power set at 100 watts and use the speaker volume control to put out about 40 maybe 50 watts from the rig. That way the radio audio isnt too crazy over driving anything and making your signal too wide. If i remember right this proIII is rated for 100% duty cycle on digital just like it is for RTTY but i never really found a good piece of info on power output so I just do like everyone else and run about 40 or 50 watts. I know RTTY I can run 100 and all day long with no problems.. I worked a guy in Mississippi this morning wi th about 5 watts :).. My mistake but he copied me 100% and gave me a 579 rst ... Oh ya the beam was 180 off from him also :) The other neat thing about the ProIII is when running psk I have a lsbd for digital mode and it bypasses the mic control and compression settings altogether when using the acessory port on the back. The more I use this rig the more I just love it :).. DxB PSK will not work on my system unless I manually key the transmitter and I still do not know why ?.. Try MMVARI see if you might like that better.. Dave N8DC
----- Original Message ----- From: "Tony N2TK" <[email protected]> To: [email protected] Sent: Friday, December 25, 2009 12:52:37 PM GMT -05:00 US/Canada Eastern Subject: [Dxbase] PSK and RTT questions After all these years finally got on RTTY this past year. For contesting I use N1MM/MMTTY. It seems to work very well. For casual operation I have been using AXETTY (Thanks Joe) with DXBase 2007. Probably the only pain is that I can't click on a callout in the "Internet Cluster" or "DX Info" box and have the call appear in "Their Call" in AXETTY. Maybe the next release of DXBase 20?? will have this feature? Just setup DxbPSK. I have never been on PSK so not sure what to expect and what to do. Maybe someone could give me some assistance with this? Any setup screens you can share or send me to some site that would quicken my learning curve? I can copy the signals I see. My waterfall screen seems to be very weak(dark) even with cranking up the audio card's volume compared to where I have it set for RTTY. Not sure about the tuning in of a signal and setting up the transmit. I am using a K3 and have that setup for 25W out for PSK. Any feedback would be appreciated. 73 and Merry Christmas N2TK, Tony ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto: This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
