Hmmm, well since you are certain all the communications stuff was set right, maybe you have the wrong radio toggled ( radio 1 instead of 2 or vice versa ). Really don't know so just a guess.
----- Original Message ----- From: "George Nicholson" <geo...@nicholsoncontracting.com> To: "Jack" <lenn...@bellsouth.net>; <Dxbase@mailman.qth.net> Sent: Wednesday, March 10, 2010 8:49 AM Subject: RE: [Dxbase] Icom 706MKIIG rig interface I have tried various combinations of the handshake settings ---- George Nicholson, Jr. -----Original Message----- From: Jack [mailto:lenn...@bellsouth.net] Sent: Wednesday, March 10, 2010 6:59 AM To: George Nicholson; Dxbase@mailman.qth.net Subject: Re: [Dxbase] Icom 706MKIIG rig interface George, I've not seen any mention of how you set the port handshaking options in DXbase for cdt, dtr, etc.... Perhaps you don't have those set for that radio's needs. Usually dtr can be left unchecked and the others checked but maybe someone with that radio working can tell you the correct settings. Just a thought. As long as you have the DXbase options set to agree with the radio, there really isn't much else to it. Jack ----- Original Message ----- From: "George Nicholson" <geo...@nicholsoncontracting.com> To: <Dxbase@mailman.qth.net> Sent: Monday, March 08, 2010 11:03 PM Subject: [Dxbase] Icom 706MKIIG rig interface >I have an Icom 706 MKIIG that I cannot get DxBase to read frequency? I > am able to use Writelog and Ham Radio Deluxe with the ICOM on same > computer. > > > > The DXBase is trying to read the radio as it takes a long time to change > lines when I hit enter but no frequency readings. > > > > I have DXBase set to Radio 1, comport 1, 19200, n, 8, 2. This works in > Writelog and also Ham Radio Deluxe. I am using a USB interface and a > virtual comport. > > > > Any suggestions? > > > > N4GRN George Nicholson Jr > > > > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dxbase@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dxbase@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
