Yes, but I'm using a Green Heron rotor control box and it's controlling a Yaesu G1000-DXA rotor. This is NOT using a stock HAM-M or Tailtwister style control box. I'm using a Keyspan USB-to-Serial adapter and it's working just fine under Windows 7/64. Here are the settings I'm using:
TYPE: HYG-DCU1 Initialize: AP1#;AM1; Turn Rotor: (blank) Stop Rotor: ; "Character" radio button checked, and "Use Leading Zeroes" ticked. Use Delay un-ticked. Port is COM1, 4800/N-8-1. Bump adjustment 5 degrees. Again, this is NOT going directly to a stock control box so use with caution. ----------------------------------- Regards, Peter, W2IRT -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert C. Crawford Sent: Sunday, October 24, 2010 8:38 AM To: DXbase Subject: [Dxbase] DCU1 - DXbase - WIN7 - Serial>USB Anyone running DXbase on Windows7 with DCU1 rotor control with a serial to USB adapter? And have it working? Let me know, I am trying to get mine working. Thanks & 73 de, Bob KN8VFV - 12 July 1960, K8VFV since 1961 Member of: 10-X, CCA & SEMDXA (Pres.) Life member: ARRL & QCWA 9 Band DXCC, 6 Band WAS, 50 MHz VUCC (370) DXCC Honor Roll #1 Phone and 5BWAZ #179 Web Site - http://www.k8vfv.com Email - K8VFV at ARRL dot NET Outgoing email checked by MSE Listening 145.700 MHz In GOD we trust. ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
