You can add the following K3 parameters to the radios.ini file and it will
appear in the options.
*********************************************************************************
[ELECRAFT_K3]
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3
LSB=1
USB=2
CW=3
FM=4
AM=5
FSK=6
RTTY=6
CWR=7
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=20
DefaultCW=3
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3
SelectVFOA= eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)
SetFilter= eoc(0)
GetFilter= asc("K31;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)
SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";") eoc(0)
*********************************************************************************
Wes N7WS
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
