I inserted the parameters N7WS published below into the DXBase Radio ini
files and saved the new file. Went to the Tools, Options, User Options, and
Radio 1 in DXBase and selected the now present K3 for my radio of choice. I
clicked on the green checkmark in the DXInfo window, and the K3 did not QSY
to the new frequency; something had to be wrong with the file.
With Wordpad, I opened the radio ini files, took a look at the K2 parameters
and noted a remarked similarity (damn near the same to be exact) between the
two. After checking the lines, I found a command line in the K2 parameters
was not present in the K3 file that N7WS sent out. The (SetVFOA) string that
is "snuggled" in between the Select VFOA= eoc(0) and the GetVFOA= asc("FA;")
rrs(14) eoc(0) lines was not there.
So, I "copied the SetVFOA line from the K2 file and pasted it into the K3
parameters. That fixed the problem.
There are two other differences that I found between the K2 and the K3
parameters. PACING is 1 for the K2 and 20 for the K3; and the SetFilter
line is a long "song and dance" routine (string) for the K2, and is rather
direct and to the point for the K3; SetFilter= eoc(0). I left "sleeping
dogs lie", and did not change them.
Not being a computer whiz, I have no idea what the command strings do.
Hopefully someone with a little (a lot) more expertise than I can fill me
(and most likely a multitude of others) in.
Dick K8ZTT
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Wes N7WS
Sent: Sunday, December 05, 2010 8:36 PM
To: Bill [NS4C]; 'DXBase Reflector'; [email protected]
Subject: Re: [Dxbase] RADIO K3???
You can add the following K3 parameters to the radios.ini file and it will
appear in the options.
****************************************************************************
*****
[ELECRAFT_K3]
P_LSB=1
P_USB=2
P_CW_USB=0
P_CW_LSB=0
P_AM=5
P_FM=4
P_FM_N=0
P_DATA_LSB=0
P_DATA_USB=0
P_DATA_FM=0
P_CW=3
P_FSK=6
P_RTTY=6
P_PACKET=9
P_CWR=3
LSB=1
USB=2
CW=3
FM=4
AM=5
FSK=6
RTTY=6
CWR=7
HIGH=3
MEDIUM=2
LOW=1
OFF=0
ON=1
FREQDIVIN=1
FREQDIVOUT=1
USEEXTENDEDMODES=0
FREQSHIFT=0
PACING=20
DefaultCW=3
DefaultAM=5
DefaultFSK=6
DefaultRTTY=6
DefaultFM=4
DefaultCWR=3
SelectVFOA= eoc(0)
GetVFOA= asc("FA;") rrs(14) eoc(0)
PrsVFOA= asc("FA") dec(%vfoa,11) asc(";") eoc(0)
SelectVFOB= eoc(0)
SetVFOB= asc( "FB" ) dec( %vfob,11 ) asc( ";" ) eoc(0)
GetVFOB= asc("FB;") rrs(14) eoc(0)
PrsVFOB= asc("FB") dec(%vfob,11) asc(";") eoc(0)
SetMode= eoc(0)
GetMode= asc( "IF;" ) rrs(38) eoc(0)
PrsMode= asc("IF") dec(%dummy,27) dec(%mode,1) dec(%dummy,7) asc(";") eoc(0)
SetFilter= eoc(0)
GetFilter= asc("K31;") asc( "FW;" ) eoc(0)
PrsFilter= asc("FW") dec(%dummy,4) dec( %filter, 1 ) asc ( ";" ) eoc(0)
SetSplit= asc( "FT" ) dec( %split ) asc ( ";" ) eoc(0)
GetSplit= asc( "IF;" ) rrs(38) eoc(0)
PrsSplit= asc("IF") dec(%dummy,30) dec(%split,1) dec(%dummy,4) asc(";")
eoc(0)
****************************************************************************
*****
Wes N7WS
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
