Bob, >From my experience DXBase has never been able to key CW through Windows. The only way I've ever gotten it to work was after I added a MicroHAM MicroKeyer II to my station to select the K1EL keyer option. Now CW from DXBase works great. Without the external keyer, not at all.
73, Gary AL9A ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: December 10, 2011 7:40 AM Subject: [Dxbase] CW keying with serial port. > > I recently installed a 2 port PCI serial card in my Vista 64 bit computer > for use with rig control and cw keying. The rig control works great but no > luck with the cw keying. I have configured the port to com1 as well as > dxbase to use com1. Not sure what the problem might be. Any help would be > appreciated. > > Bob > WB2UBW > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
