Gary,
My Radio.ini file did not have any entries for the ICOM 7600. Joe Glocker
WA6AXE sent the updated file to me. The ICOM 7600 now works fine with DXbase.
73 Tom, N4TL
From: Gary AL9A <a...@mtaonline.net>
To: DXBase List <dxbase@mailman.qth.net>
Sent: Friday, August 7, 2015 1:38 AM
Subject: Re: [Dxbase] icom 7600
Tom,
If you have DXBase installed you should already have multiple ini files for
the IC-7600. They are located in your install directory in a file called
Radios.ini. There are currently four different ini files for the IC-7600
with slightly different names that denote how the radio interacts with
DXBase with a particular ini file.
[ICOM_IC-7600]
This is the basic original IC-7600 ini file created by N5IN.
[ICOM_IC-7600_DW_ok_SPLT_ok]
This is an enhanced ini file created by Joe WA6AXE and N5IN that enables
both Dual Watch and Split to work with DXBase.
[ICOM_IC-7600_SPLITOK]
Another variation of the IC-7600 ini file by WA6AXE that allows the Split
frequency to be recorded in the Notes field of DXBase. This is the one I
use as my normal ini file.
[ICOM_IC-7600_VFO_A_Only]
The final variation of IC-7600 ini files by N5IN. Not sure of the purpose
of this version, but apparently it only uses VFO A information for logging
purposes.
All of these ini files should be available to you for selection in
Tools/Options/User Options... under the Radio1 and Radio2 tabs. Select ICOM
in the Manufacturer box and then in the model box is a list of various Icom
radio ini files. The four files referenced above are in that listing.
Select which ever one you like and see how it performs. It's been a long
time since these came out I don't remember the exact differences between
them, so some experimentation may be required depending upon what you are
trying to get. Maybe Joe can refresh our memories of what the subtle
differences are between these ini files.
73,
Gary AL9A
-----Original Message-----
From: Tom Lewis via Dxbase
Sent: August 05, 2015 12:08 PM
To: DXBase List
Subject: [Dxbase] icom 7600
Would some one send me the INI file for an Icom 7600.
ThanksTom, N4TL
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Dxbase mailing list
Home: http://mailman.qth.net/mailman/listinfo/dxbase
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dxbase@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
