I'm using ERC, but with RS-232 interface, both on Yaesu 1000 and 2800. 73, Ilya.
Using mobile device, Sent from BlueMail On Oct 31, 2016, 18:45, at 18:45, "Ron Stordahl, AE5E via Dxbase" <[email protected]> wrote: >There are a number of available interfaces. >http://www.idiompress.com/ > >Easy-Rotor-Control e-shop >EBay: Rotor control for G-1000DXA >as well as Yaeus's own which appears to me to be tremendously >overpriced. >I have an old Idiompress card which has failed. I have tried to >contact them to see if it would be practical to repair, but no response >has been received as yet. >The ERC-Mini DX from Easy-Rotor-Control has a built in USB interface >which I believe generates a virtual Com port which should be compatible >with DXBase. >Does anyone have any experiences with any of these interfaces with >DXBase? >Ron, AE5E >______________________________________________________________ >Dxbase mailing list >Home: http://mailman.qth.net/mailman/listinfo/dxbase >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Dxbase mailing list Home: http://mailman.qth.net/mailman/listinfo/dxbase Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
