I appreciate your response on this subject but I am afraid I don't see how
the "PRE" tag will help at all... :( The problem seems to be with TABLES in
DynLayers in Mac IE 5. Is there a way to use a PRE tag to replace the
method for formatting with a table? Are there methods that I cannot find
for setting the vertical and horizontal alignment of text using a PRE tag?
M.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Robert
Rainwater
Sent: Friday, January 26, 2001 1:43 PM
To: DynAPI Help List
Subject: Re[2]: [Dynapi-Help] Arg, Help w/ setHTML and Tables
If you use <pre>, you have to be careful, because anything in the
<pre> tags won't wrap around (unless there is a carriage return). This
can be a good thing or bad thing, depending on what you are trying to
do.
--
// Robert Rainwater
On 1/26/2001, 4:21:03 PM EST, Richard wrote about "[Dynapi-Help] Arg, Help
w/ setHTML and Tables":
> Hi,
> I don't know if it's any use in your case, but what I use a lot for
allignment are <pre></pre> tags.
> This allows line feeds, and tabs to be shown in HTML, you don't need <br>
anymore,
> Here is a small example:
> Item one Item two Item three
Item four
> content1 content2 content3
content4
> and it just
keeps
> on going on .
> The HTML source for that looks like this: <PRE>Item one Item two Item
three Item fourcontent1 content2 content3 content4and it just keepson
going on .</PRE> Cheers,Richard Bennett
> [EMAIL PROTECTED](Everything running on, and ported
to the 19/12/2000 snapshot of DynAPI2)
> ----- Original Message -----
> From: "Matthew Alan Shirey" <[EMAIL PROTECTED]>
> To: "Dynapi-Help" <[EMAIL PROTECTED]>
> Sent: Friday, January 26, 2001 8:40 PM
> Subject: [Dynapi-Help] Arg, Help w/ setHTML and Tables
>> Hey all,
>>
>> I have a pretty big problem and I am hoping someone can at least point me
>> in the right direction for fixing the API. It appears that using setHTML
>> containing a TABLE causes all layers after it to not appear in Mac IE 5.
>> Here's an example:
>>
>> http://bridgedev.ctlt.wsu.edu/LS/test/dynapi/test.asp
>>
>> This should place three very simple boxes labeled "A", "B", and "C".
This
>> works fine on IE and NS on PC, and NS 6 on Mac, but IE 5 on the Mac does
not
>> show the second or third box... This is fairly important to me unless
>> someone has another method to control horizontal and vertical text
alignment
>> in a layer... =(
>>
>> M.
>>
>>
>> _______________________________________________
>> Dynapi-Help mailing list
>> [EMAIL PROTECTED]
>> http://lists.sourceforge.net/lists/listinfo/dynapi-help
>> ____________________________________________________________
>> Get your free domain name and domain-based e-mail from
>> Namezero.com. New! Namezero Plus domains now available.
>> Find out more at: http://www.namezero.com
>>
----------------------
DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/
DynAPI Homepage: http://dynapi.sourceforge.net/
_______________________________________________
Dynapi-Help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/dynapi-help
_______________________________________________
Dynapi-Help mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/dynapi-help
