Please contact your factory representative (whoever you bought the parts from) for support and tools to program your NVM. The kernel you have should have support for the i211.
Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Deepa G [mailto:gde...@identiv.com] Sent: Friday, September 19, 2014 1:41 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] i211 not working Hi, We are using Intel’s i211 PCIe ethenet controller with iMx6 microcontroller for our product. We are using open embedded linux and we are having tough time making the i211 controller work with our board. The i211 is being detected on the PCI Express interface, and is reporting its expected "blank" Device ID of 0x1532. We have not programmed the iNVM as we are not sure how to do this? Kindly provide details on how to do this and what information has to be programmed for the drivers to load. We are using the v3.10.17-r2 kernel? We are also not sure if the kernel has support for i211. Kindly provide details on this. Thanks, Deepa ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
