I just found out this is documented in the i210 FAQ. Go to intel.com and search for "i210 FAQ" (or "i211 FAQ" which makes more sense for you) and it should take you to a list of documents that includes the FAQ.
Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Fujinaka, Todd Sent: Monday, September 22, 2014 9:22 AM To: Deepa G; e1000-devel@lists.sourceforge.net Subject: RE: [E1000-devel] i211 not working There will be a default MAC address and device ID and the default device ID is not recognized by a stock driver. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Deepa G [mailto:gde...@identiv.com] Sent: Monday, September 22, 2014 1:30 AM To: Fujinaka, Todd; e1000-devel@lists.sourceforge.net Subject: RE: [E1000-devel] i211 not working Thanks. I have one more query. Should the NVM be initialized for the driver to load successfully? Thanks, Deepa G Deepa Josephine | Technical Manager | Office: +91-44-42931331 | Skype: deepa.josephine Identiv | Trust Your World | www.identiv.com -----Original Message----- From: Fujinaka, Todd [mailto:todd.fujin...@intel.com] Sent: Friday, September 19, 2014 9:00 PM To: Deepa G; e1000-devel@lists.sourceforge.net Subject: RE: [E1000-devel] i211 not working Please contact your factory representative (whoever you bought the parts from) for support and tools to program your NVM. The kernel you have should have support for the i211. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Deepa G [mailto:gde...@identiv.com] Sent: Friday, September 19, 2014 1:41 AM To: e1000-devel@lists.sourceforge.net Subject: [E1000-devel] i211 not working Hi, We are using Intel’s i211 PCIe ethenet controller with iMx6 microcontroller for our product. We are using open embedded linux and we are having tough time making the i211 controller work with our board. The i211 is being detected on the PCI Express interface, and is reporting its expected "blank" Device ID of 0x1532. We have not programmed the iNVM as we are not sure how to do this? Kindly provide details on how to do this and what information has to be programmed for the drivers to load. We are using the v3.10.17-r2 kernel? We are also not sure if the kernel has support for i211. Kindly provide details on this. Thanks, Deepa ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
