The hints should be: # ethtool -m eth10 Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [ 445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported. Please update the NVM image.
# ethtool -i eth10 driver: i40e version: 2.9.21 firmware-version: 3.31 0x80000d31 1.1767.0 And the working case: # ethtool -i eth8 driver: i40e version: 2.9.21 firmware-version: 6.01 0x800035cf 1.1876.0 If you don't see it, 6.01 > 3.31. The NVM update tool should be available on downloadcenter.intel.com Todd Fujinaka Software Application Engineer Datacenter Engineering Group Intel Corporation todd.fujin...@intel.com -----Original Message----- From: Jakub Jankowski [mailto:sha...@toxcorp.com] Sent: Tuesday, August 27, 2019 4:03 AM To: e1000-devel@lists.sourceforge.net Cc: net...@vger.kernel.org; sha...@toxcorp.com; mhems...@open-systems.com Subject: [E1000-devel] SFP+ EEPROM readouts fail on X722 (ethtool -m: Invalid argument) Hi, We can't get SFP+ EEPROM readouts for X722 to work at all: # ethtool -m eth10 Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [ 445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported. Please update the NVM image. # lspci | grep 3d:00.3 3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 09) We're running 4.19.65 kernel at the moment, testing using the newest out-of-tree Intel module # modinfo -F version i40e 2.9.21 We also tried: - 4.19.65 with in-tree i40e (2.3.2-k) - stock Arch Linux (kernel 5.2.5, driver 2.8.20-k) and the results are the same, as shown above. # ethtool -i eth10 driver: i40e version: 2.9.21 firmware-version: 3.31 0x80000d31 1.1767.0 expansion-rom-version: bus-info: 0000:3d:00.3 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes # dmidecode -s baseboard-manufacturer Intel Corporation # dmidecode -s baseboard-product-name S2600WFT # dmidecode -s baseboard-version H48104-853 # lspci -vvv (...) 3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ (rev 09) DeviceName: Intel PCH Integrated 10 Gigabit Ethernet Controller Subsystem: Intel Corporation Ethernet Connection X722 for 10GbE SFP+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 112 NUMA node: 0 Region 0: Memory at ab000000 (64-bit, prefetchable) [size=16M] Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32K] Expansion ROM at <ignored> [disabled] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] MSI-X: Enable+ Count=129 Masked- Vector table: BAR=3 offset=00000000 PBA: BAR=3 offset=00001000 Capabilities: [a0] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop- FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s (ok), Width x1 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled AtomicOpsCtl: ReqEn- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [e0] Vital Product Data Product Name: Example VPD Read-only fields: [V0] Vendor specific: [RV] Reserved: checksum good, 0 byte(s) reserved End Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV) IOVCap: Migration-, Interrupt Message Number: 000 IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy- IOVSta: Migration- Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 03 VF offset: 109, stride: 1, Device ID: 37cd Supported Page Size: 00000553, System Page Size: 00000001 Region 0: Memory at 00000000af000000 (64-bit, prefetchable) Region 3: Memory at 00000000b0020000 (64-bit, prefetchable) VF Migration: offset: 00000000, BIR: 0 Capabilities: [1a0 v1] Transaction Processing Hints Device specific mode supported No steering table available Capabilities: [1b0 v1] Access Control Services ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- Kernel driver in use: i40e Kernel modules: i40e Same kernel+i40e, same SFP+ module - but on Intel X710, works like a treat: # lspci | grep X7 81:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) 81:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01) # ethtool -m eth8 Identifier : 0x03 (SFP) Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID) Connector : 0x07 (LC) Transceiver codes : 0x10 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 Transceiver type : 10G Ethernet: 10G Base-SR Transceiver type : Ethernet: 1000BASE-SX Encoding : 0x06 (64B/66B) BR, Nominal : 10300MBd (...) # ethtool -i eth8 driver: i40e version: 2.9.21 firmware-version: 6.01 0x800035cf 1.1876.0 expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes # Is this a known problem? Best regards, Jakub _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
