Sorry about the top posting, but if I don't do it this way I can't read
anything in Outlook (not my preferred MUA).
I think I may have been wrong about things. I'm not as familiar with the x722,
and the NVM versions are completely different than the x710 and I was confused.
Even worse, I'm not sure if the x722 is able to read the data from the SFP/SFP+
EEPROM. I remembered that was a feature we requested internally but I don't
remember what the progress was.
I'm asking around to see if I can get clarification. I haven't heard anything
yet.
Todd Fujinaka
Software Application Engineer
Datacenter Engineering Group
Intel Corporation
todd.fujin...@intel.com
-----Original Message-----
From: Jakub Jankowski [mailto:sha...@toxcorp.com]
Sent: Tuesday, August 27, 2019 4:01 PM
To: Fujinaka, Todd <todd.fujin...@intel.com>; e1000-devel@lists.sourceforge.net
Cc: net...@vger.kernel.org; mhems...@open-systems.com
Subject: Re: [E1000-devel] SFP+ EEPROM readouts fail on X722 (ethtool -m:
Invalid argument)
Hi,
On 8/27/19 7:56 PM, Fujinaka, Todd wrote:
The hints should be:
# ethtool -m eth10
Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [
445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported.
Please update the NVM image.
# ethtool -i eth10
driver: i40e
version: 2.9.21
firmware-version: 3.31 0x80000d31 1.1767.0
And the working case:
# ethtool -i eth8
driver: i40e
version: 2.9.21
firmware-version: 6.01 0x800035cf 1.1876.0
If you don't see it, 6.01 > 3.31.
The reason why firmware between the two is (that much) different is because the
non-working case is from X722 NIC, while the working one is from X710.
The NVM update tool should be available on downloadcenter.intel.com
Thanks for the pointer to NVM updater. I'd like to offer some additional
comments about my experience with the newest one (v4.00):
a) running ./nvmupdate64e (from X722_NVMUpdate_Linux_x64 subdir) errors out
without really saying what's wrong:
# ./nvmupdate64e
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.30.2.11
Copyright (C) 2013 - 2017 Intel Corporation.
WARNING: To avoid damage to your device, do not stop the update or reboot
or power off the system during this update.
Inventory in progress. Please wait [+.........]
Tool execution completed with the following status: The configuration file
could not be opened/read, or a syntax error was discovered in the file
Press any key to exit.
after enabling logging (-l out.log) a bit more is revealed:
# tail -n 2 out.log
Error: Config file line 2: Not supported config file version.
Error: Missing CONFIG VERSION parameter in configuration file.
but that's not entirely true, CONFIG VERSION is set in the default
configuration file:
# head -n 2 nvmupdate.cfg
CURRENT FAMILY: 1.0.0
CONFIG VERSION: 1.14.0
so why isn't this understood?
Manually editing nvmupdate.cfg and setting CONFIG VERSION: 1.11.0 seems to make
this particular problem go away.
b) Re-doing this with downgraded config version exposes another problem:
Config file read.
Error: Can't open NVM map file [Immediate_offset_2.txt]
and indeed, there is no Immediate_offset_2.txt in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_Linux_x64/
There is one, however, in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_EFIx64/ subdir.
Copying it over to the _Linux_x64 resolves this particular problem
c) Re-doing this with Immediate_offset_2.txt in place exposes third problem:
Error: Can't open NVM image file
[LBG_B2_Wolf_Pass_WFT_X557_P01_PHY_Auto_Detect_P23_NCSI_v3.31_800016DB.bin]
and once again - same story. It exists in
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_EFIx64/ but not
NVMUpdatePackage_WFT_WFQ&WF0_v4.00/X722_NVMUpdate_Linux_x64/ - had to copy it over.
Once I managed to get all these out of the way, the tool finally ran:
Num Description Ver. DevId S:B Status
=== ======================================== ===== ===== ======
===============
01) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:024 Update not
available
02) Intel(R) Ethernet Connection X722 for 3.49 37D2 00:061 Update
10GBASE-T available
03) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:175 Update not
available
The initial starting point was:
0) firmware-version: 3.31 0x80000d31 1.1767.0
After first update+reboot, this was bumped to:
1) firmware-version: 3.1d 0x800016db 1.1767.0 (but ethtool -m ethX still
doesn't work)
So I ran the tool the second time, it said 'Update available' again, but this
time:
Num Description Ver. DevId S:B Status
=== ======================================== ===== ===== ======
===============
01) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:024 Update not
available
02) Intel(R) Ethernet Connection X722 for 3.29 37D2 00:061 Update
10GBASE-T available
03) Intel(R) Ethernet Server Adapter I350-T4 1.99 1521 00:175 Update not
available
Options: Adapter Index List (comma-separated), [A]ll, e[X]it
Enter selection:02
Would you like to back up the NVM images? [Y]es/[N]o: Y
Update in progress. This operation may take several minutes.
[*******+..]
Tool execution completed with the following status: <---------- why is
there no status printed?
Press any key to exit.
Checking output log:
# cat out3.log
Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.30.2.11
Copyright (C) 2013 - 2017 Intel Corporation.
./nvmupdate64e -c nvmupdate.cfg -l out3.log
Config file read.
Inventory
[00:061:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Flash inventory started
Shadow RAM inventory started
Alternate MAC address is not set
Shadow RAM inventory finished
Flash inventory finished
OROM inventory started
OROM inventory finished
PHY NVM inventory started
PHY NVM inventory finished
[00:061:00:01]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Device already inventoried.
[00:061:00:02]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
Device already inventoried.
PHY NVM inventory started
PHY NVM inventory finished
[00:061:00:03]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
Device already inventoried.
Update
[00:061:00:00]: Intel(R) Ethernet Connection X722 for 10GBASE-T
Creating backup images in directory: A4BF0164884A
Backup images created.
Flash update started
NVM image verification started
Shadow RAM image verification started
Image differences found at offset 0x3AE [Device=0xF, Buffer=0x0] -
update required.
Error: Flash update failed
[00:061:00:02]: Intel(R) Ethernet Connection X722 for 10GbE SFP+
#
However, ethtool -i suggests that firmware was updated to:
2) firmware-version: 4.00 0x80001577 1.1580.0 <------- so it did
_something_ after all?
At this point, every subsequent attempt to run the NVM updater yields
the same results: an update is available, but attempting to apply it
fails with the same message in log.
And my initial issue still persists - ethtool -m <iface> still returns
"invalid argument" with "Module EEPROM memory read not supported. Please
update the NVM image" logged in dmesg.
How can I resolve this?
Cheers,
Jakub.
Todd Fujinaka
Software Application Engineer
Datacenter Engineering Group
Intel Corporation
todd.fujin...@intel.com
-----Original Message-----
From: Jakub Jankowski [mailto:sha...@toxcorp.com]
Sent: Tuesday, August 27, 2019 4:03 AM
To: e1000-devel@lists.sourceforge.net
Cc: net...@vger.kernel.org; sha...@toxcorp.com; mhems...@open-systems.com
Subject: [E1000-devel] SFP+ EEPROM readouts fail on X722 (ethtool -m: Invalid
argument)
Hi,
We can't get SFP+ EEPROM readouts for X722 to work at all:
# ethtool -m eth10
Cannot get module EEPROM information: Invalid argument # dmesg | tail -n 1 [
445.971974] i40e 0000:3d:00.3 eth10: Module EEPROM memory read not supported.
Please update the NVM image.
# lspci | grep 3d:00.3
3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for
10GbE SFP+ (rev 09)
We're running 4.19.65 kernel at the moment, testing using the newest
out-of-tree Intel module
# modinfo -F version i40e
2.9.21
We also tried:
- 4.19.65 with in-tree i40e (2.3.2-k)
- stock Arch Linux (kernel 5.2.5, driver 2.8.20-k) and the results are the
same, as shown above.
# ethtool -i eth10
driver: i40e
version: 2.9.21
firmware-version: 3.31 0x80000d31 1.1767.0
expansion-rom-version:
bus-info: 0000:3d:00.3
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
# dmidecode -s baseboard-manufacturer
Intel Corporation
# dmidecode -s baseboard-product-name
S2600WFT
# dmidecode -s baseboard-version
H48104-853
# lspci -vvv
(...)
3d:00.3 Ethernet controller: Intel Corporation Ethernet Connection X722 for
10GbE SFP+ (rev 09)
DeviceName: Intel PCH Integrated 10 Gigabit Ethernet Controller
Subsystem: Intel Corporation Ethernet Connection X722 for 10GbE SFP+
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 112
NUMA node: 0
Region 0: Memory at ab000000 (64-bit, prefetchable) [size=16M]
Region 3: Memory at b0000000 (64-bit, prefetchable) [size=32K]
Expansion ROM at <ignored> [disabled]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] MSI-X: Enable+ Count=129 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00001000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1
<64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
SlotPowerLimit 0.000W
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency
L0s <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF
Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [e0] Vital Product Data
Product Name: Example VPD
Read-only fields:
[V0] Vendor specific:
[RV] Reserved: checksum good, 0 byte(s) reserved
End
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn-
ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [150 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy-
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function
Dependency Link: 03
VF offset: 109, stride: 1, Device ID: 37cd
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000af000000 (64-bit, prefetchable)
Region 3: Memory at 00000000b0020000 (64-bit, prefetchable)
VF Migration: offset: 00000000, BIR: 0
Capabilities: [1a0 v1] Transaction Processing Hints
Device specific mode supported
No steering table available
Capabilities: [1b0 v1] Access Control Services
ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd-
EgressCtrl- DirectTrans-
Kernel driver in use: i40e
Kernel modules: i40e
Same kernel+i40e, same SFP+ module - but on Intel X710, works like a treat:
# lspci | grep X7
81:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for
10GbE SFP+ (rev 01)
81:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for
10GbE SFP+ (rev 01) # ethtool -m eth8
Identifier : 0x03 (SFP)
Extended identifier : 0x04 (GBIC/SFP defined by
2-wire interface ID)
Connector : 0x07 (LC)
Transceiver codes : 0x10 0x00 0x00 0x01 0x00
0x00 0x00 0x00 0x00
Transceiver type : 10G Ethernet: 10G Base-SR
Transceiver type : Ethernet: 1000BASE-SX
Encoding : 0x06 (64B/66B)
BR, Nominal : 10300MBd
(...)
# ethtool -i eth8
driver: i40e
version: 2.9.21
firmware-version: 6.01 0x800035cf 1.1876.0
expansion-rom-version:
bus-info: 0000:81:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
#
Is this a known problem?
Best regards,
Jakub
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
