On 04/23/2009 04:10 PM, Thadeu Lima de Souza Cascardo wrote: > On Thu, Apr 23, 2009 at 03:36:43PM +0200, Jiri Slaby wrote: >> Hi, >> >> 4a865905f685eaefaedf6ade362323dc52aa703b >> (PCI PM: Make pci_set_power_state() handle devices with no PM support) >> breaks e1000 after being kexec'ed. These reverts fix the problem: >> Revert "PCI PM: Make pci_set_power_state() handle devices with no PM >> support" >> Revert "PCI PM: Introduce __pci_[start|complete]_power_transition() >> (rev. 2)" >> >> I reverted the second one just for an easy revert of the former one, >> which is actually the culprit. >> >> The symptoms: >> e1000 0000:02:01.0: enabling device (0000 -> 0003) >> e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 >> e1000 0000:02:01.0: setting latency timer to 64 >> e1000: 0000:02:01.0: e1000_probe: The EEPROM Checksum Is Not Valid >> Switched to high resolution mode on CPU 0 > > Have you tried b43fcd7dc7b, found in v2.6.30-rc3?
I've tried 2.6.30-rc3-next-20090423 without success. ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel
