This patch fixes bracket-related issues reported by checkpatch, such as unnecessary brackets around statements, brackets placed incorrectly, and missing brackets.
Fixes 7 errors and 10 warnings reported by checkpatch. Signed-off-by: Asbjoern Sloth Toennesen <[email protected]> --- drivers/net/e1000e/es2lan.c | 8 ++++---- drivers/net/e1000e/ethtool.c | 4 ++-- drivers/net/e1000e/hw.h | 2 +- drivers/net/e1000e/ich8lan.c | 5 ++--- drivers/net/e1000e/lib.c | 6 ++---- drivers/net/e1000e/netdev.c | 21 ++++++++------------- drivers/net/e1000e/phy.c | 28 +++++++++++++--------------- 7 files changed, 32 insertions(+), 42 deletions(-) diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index afed60f..6069e9f 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -100,8 +100,8 @@ * with a lower bound at "index" and the upper bound at * "index + 5". */ -static const u16 e1000_gg82563_cable_length_table[] = - { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF }; +static const u16 e1000_gg82563_cable_length_table[] = { + 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF }; #define GG82563_CABLE_LENGTH_TABLE_SIZE \ ARRAY_SIZE(e1000_gg82563_cable_length_table) @@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) { u32 swfw_sync; - while (e1000e_get_hw_semaphore(hw) != 0); - /* Empty */ + while (e1000e_get_hw_semaphore(hw) != 0) + ; /* Empty */ swfw_sync = er32(SW_FW_SYNC); swfw_sync &= ~mask; diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 8acfbca..8ff3a8a 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -763,8 +763,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg, int offset, u32 mask, u32 write) { u32 pat, val; - static const u32 test[] = - {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + static const u32 test[] = { + 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; for (pat = 0; pat < ARRAY_SIZE(test); pat++) { E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset, (test[pat] & write)); diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 0a319e1..f009dd5 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -469,7 +469,7 @@ enum e1000_1000t_rx_status { e1000_1000t_rx_status_undefined = 0xFF }; -enum e1000_rev_polarity{ +enum e1000_rev_polarity { e1000_rev_polarity_normal = 0, e1000_rev_polarity_reversed, e1000_rev_polarity_undefined = 0xFF diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 53edfd4..c5a7726 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2303,11 +2303,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, */ if (ret_val == 0) { flash_data = er32flash(ICH_FLASH_FDATA0); - if (size == 1) { + if (size == 1) *data = (u8)(flash_data & 0x000000FF); - } else if (size == 2) { + else if (size == 2) *data = (u16)(flash_data & 0x0000FFFF); - } break; } else { /* diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 20870b2..513b4d1 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { + if (ret_val) e_dbg("Error configuring flow control\n"); - } return ret_val; } @@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw) { u32 ledctl; - if (hw->mac.ops.setup_led != e1000e_setup_led_generic) { + if (hw->mac.ops.setup_led != e1000e_setup_led_generic) return -E1000_ERR_CONFIG; - } if (hw->phy.media_type == e1000_media_type_fiber) { ledctl = er32(LEDCTL); diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 820ea48..d71854f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, goto next_desc; } -#define rxtop rx_ring->rx_skb_top +#define rxtop (rx_ring->rx_skb_top) if (!(status & E1000_RXD_STAT_EOP)) { /* this descriptor is only the beginning (or middle) */ if (!rxtop) { @@ -1806,9 +1806,8 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter) err = pci_enable_msix(adapter->pdev, adapter->msix_entries, adapter->num_vectors); - if (err == 0) { + if (err == 0) return; - } } /* MSI-X failed, so fall through and try MSI */ e_err("Failed to initialize MSI-X interrupts. " @@ -2198,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) e1000_clean_rx_ring(adapter); - for (i = 0; i < rx_ring->count; i++) { + for (i = 0; i < rx_ring->count; i++) kfree(rx_ring->buffer_info[i].ps_pages); - } vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; @@ -2240,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, /* handle TSO and jumbo frames */ if (bytes/packets > 8000) retval = bulk_latency; - else if ((packets < 5) && (bytes > 512)) { + else if ((packets < 5) && (bytes > 512)) retval = low_latency; - } break; case low_latency: /* 50 usec aka 20000 ints/s */ if (bytes > 10000) { /* this if handles the TSO accounting */ - if (bytes/packets > 8000) { + if (bytes/packets > 8000) retval = bulk_latency; - } else if ((packets < 10) || ((bytes/packets) > 1200)) { + else if ((packets < 10) || ((bytes/packets) > 1200)) retval = bulk_latency; - } else if ((packets > 35)) { + else if ((packets > 35)) retval = lowest_latency; - } } else if (bytes/packets > 2000) { retval = bulk_latency; } else if (packets <= 2 && bytes < 512) { @@ -2262,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, break; case bulk_latency: /* 250 usec aka 4000 ints/s */ if (bytes > 25000) { - if (packets > 35) { + if (packets > 35) retval = low_latency; - } } else if (bytes < 6000) { retval = low_latency; } diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index a26c296..23b1e48 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read); /* Cable length tables */ -static const u16 e1000_m88_cable_length_table[] = - { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +static const u16 e1000_m88_cable_length_table[] = { + 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; #define M88E1000_CABLE_LENGTH_TABLE_SIZE \ ARRAY_SIZE(e1000_m88_cable_length_table) -static const u16 e1000_igp_2_cable_length_table[] = - { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, - 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, - 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, - 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, - 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, - 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, - 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, - 124}; +static const u16 e1000_igp_2_cable_length_table[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, + 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, + 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, + 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, + 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, + 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, + 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, + 124 }; #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ ARRAY_SIZE(e1000_igp_2_cable_length_table) @@ -1043,9 +1043,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + if (phy->autoneg_mask & ADVERTISE_1000_FULL) ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); - } return ret_val; } @@ -1840,8 +1839,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) u16 phy_data, i, agc_value = 0; u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; - u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = - {IGP02E1000_PHY_AGC_A, + u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { IGP02E1000_PHY_AGC_A, IGP02E1000_PHY_AGC_B, IGP02E1000_PHY_AGC_C, IGP02E1000_PHY_AGC_D}; -- 1.7.2.3 ------------------------------------------------------------------------------ This SF Dev2Dev email is sponsored by: WikiLeaks The End of the Free Internet http://p.sf.net/sfu/therealnews-com _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
