From: Nicolas Parpandet [mailto:[email protected]] Sent: Wednesday, April 10, 2013 10:53 AM To: Dave, Tushar N Cc: [email protected] Subject: Re: [E1000-devel] autoneg fiber e1000
> >As you can see autoneg is forced on, and my link doesn't come up because >of this. >The other side is a cisco with nonegociate . > >Setting speed and duplex, even with "advertise 0x020" doesn't work, I have >to disable negociation. >Have you tried 'ethtool -A ethx autoneg off' >Already tried ;) >ethtool -A eth6 autoneg off >autoneg unmodified, ignoring >no pause parameters changed, aborting Well looks like then autoneg is disabled then. Run ethtool -a ethx. Also, fiber can only do 1gig full duplex and therefore driver always forced speed + duplex in case of fiber and so there is nothing much to negotiate. -Tushar ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ E1000-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
