> >Have you tried 'ethtool -A ethx autoneg off'
> >Already tried ;)
> >ethtool -A eth6 autoneg off
> >autoneg unmodified, ignoring
> >no pause parameters changed, aborting
> Well looks like then autoneg is disabled then. Run ethtool -a ethx.
> Also, fiber can only do 1gig full duplex and therefore driver always
> forced speed + duplex in case of fiber and so there is nothing much
> to negotiate.
There is a cisco at the other side,
when I put also a cisco on my side, if I let "autoneg" , link doesnt come up,
But If I set "speed nonegotiate" on port, link is up and workink,
I guess there is the same problem with my intel fiber card
root@mfw:~# ethtool eth6
Settings for eth6:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: FIBRE
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: no
root@mfw:~# ethtool -a eth6
Pause parameters for eth6:
Autonegotiate: off
RX: on
TX: on
> -Tushar
------------------------------------------------------------------------------
Precog is a next-generation analytics platform capable of advanced
analytics on semi-structured data. The platform includes APIs for building
apps and a phenomenal toolset for data science. Developers can use
our toolset for easy data analysis & visualization. Get a free account!
http://www2.precog.com/precogplatform/slashdotnewsletter
_______________________________________________
E1000-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit
http://communities.intel.com/community/wired
