On Thu, Mar 26, 2015 at 23:01:46 -0700, Jeff Kirsher wrote: > netdev is not the right mailing list for this question. > Adding e1000-devel mailing list...
Sorry about that. I still have problems with getting the Intel X4DACBL3 QSFP to 4x SFP breakout cable working with the i40e. I have also upgraded the NVM, but it did not help. Below is the modprobe output. [root@boron src]# ethtool -i ens5f0 driver: i40e version: 1.2.37 firmware-version: f4.33.31377 a1.2 n4.42 e1932 bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes Apr 1 12:21:27 boron kernel: i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.2.37 Apr 1 12:21:27 boron kernel: i40e: Copyright (c) 2013 - 2015 Intel Corporation. Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: f4.33.31377 a1.2 n4.42 e1932 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: FCoE capability is disabled Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: MAC address: 68:05:ca:2e:70:e0 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: SAN MAC: 68:05:ca:2e:70:e4 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: fcoe queues = 0 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: enabling bridge mode: VEB Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: PHC enabled Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: PCI-Express: Speed 8.0GT/s Width x8 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: get phy abilities failed, aq_err -7, advertised speed settings may not be correct Apr 1 12:21:27 boron kernel: i40e 0000:81:00.0: Features: PF-id[0] VFs: 64 VSIs: 66 QP: 32 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB PTP Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: f4.33.31377 a1.2 n4.42 e1932 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: FCoE capability is disabled Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: MAC address: 68:05:ca:2e:70:e1 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: SAN MAC: 68:05:ca:2e:70:e5 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: fcoe queues = 0 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: enabling bridge mode: VEB Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: PHC enabled Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: PCI-Express: Speed 8.0GT/s Width x8 Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: get phy abilities failed, aq_err -7, advertised speed settings may not be correct Apr 1 12:21:27 boron kernel: i40e 0000:81:00.1: Features: PF-id[1] VFs: 64 VSIs: 66 QP: 32 RX: 1BUF RSS FD_ATR FD_SB NTUPLE DCB PTP PS I have a 3rd party QSFP-QSFP DAC cable + Intel X4DACBL3 inserted. Might the 3rd party DAC cable confuse the driver? I need to travel to get physical access to the server, so I cannot easily pull the cable. PPS I understand: - 3rd party optics are not supported - max of 4 mac addresses, so 4x10 is OK, 4x10 + 1x40 is not OK Is this correct? ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
