Hi there, I've been struggling to get two systems with X710-DA2s communicating properly.
When I begin copying files over the network via NFS for simple benchmarking I get this: [250501.852843] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None [250514.648239] i40e 0000:41:00.0: TX driver issue detected, PF reset issued [250515.217903] i40e 0000:41:00.0: FCoE capability is disabled [250515.242963] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 [250515.300175] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None [250540.407571] i40e 0000:41:00.0: TX driver issue detected, PF reset issued [250541.217011] i40e 0000:41:00.0: FCoE capability is disabled [250541.242075] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 [250541.298920] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None [251179.986673] i40e 0000:41:00.0: TX driver issue detected, PF reset issued [251180.203451] i40e 0000:41:00.0: FCoE capability is disabled [251180.228482] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 [251180.284882] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None [251183.389662] i40e 0000:41:00.0: TX driver issue detected, PF reset issued [251184.204546] i40e 0000:41:00.0: FCoE capability is disabled [251184.229587] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 [251184.287638] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full Duplex, Flow Control: None [251186.794640] i40e 0000:41:00.0: TX driver issue detected, PF reset issued [251187.204394] i40e 0000:41:00.0: FCoE capability is disabled When I try using the NVMUpdatePackage to update the firmware to try and correct this issue it says: [root@cf Linux_x64]# ./nvmupdate64e -u -l -o update.xml -c nvmupdate.cfg Intel(R) Ethernet NVM Update Tool NVMUpdate version 1.24.33.08 Copyright (C) 2013 - 2015 Intel Corporation. Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710-2 Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710 Config file read. No devices to update Post update inventory I've tried with both i40e 1.0.11-k (built into RHEL 7.1) and 1.2.38 (latest from intel) Can anyone help me to get basic functionality on these NICs?
------------------------------------------------------------------------------
_______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
