> -----Original Message----- > From: Drew Weaver [mailto:drew.wea...@thenap.com] > Sent: Monday, June 01, 2015 5:37 AM > To: 'e1000-devel@lists.sourceforge.net' > Subject: [E1000-devel] i40e TX driver issue detected, PF reset issued > during file transfers > > Hi there, > > I've been struggling to get two systems with X710-DA2s communicating > properly. > > When I begin copying files over the network via NFS for simple > benchmarking I get this: > > [250501.852843] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full > Duplex, Flow Control: None > [250514.648239] i40e 0000:41:00.0: TX driver issue detected, PF reset > issued > [250515.217903] i40e 0000:41:00.0: FCoE capability is disabled > [250515.242963] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 > [250515.300175] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full > Duplex, Flow Control: None > [250540.407571] i40e 0000:41:00.0: TX driver issue detected, PF reset > issued > [250541.217011] i40e 0000:41:00.0: FCoE capability is disabled > [250541.242075] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 > [250541.298920] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full > Duplex, Flow Control: None > [251179.986673] i40e 0000:41:00.0: TX driver issue detected, PF reset > issued > [251180.203451] i40e 0000:41:00.0: FCoE capability is disabled > [251180.228482] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 > [251180.284882] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full > Duplex, Flow Control: None > [251183.389662] i40e 0000:41:00.0: TX driver issue detected, PF reset > issued > [251184.204546] i40e 0000:41:00.0: FCoE capability is disabled > [251184.229587] i40e 0000:41:00.0: i40e_ptp_init: added PHC on p1p1 > [251184.287638] i40e 0000:41:00.0 p1p1: NIC Link is Up 10 Gbps Full > Duplex, Flow Control: None > [251186.794640] i40e 0000:41:00.0: TX driver issue detected, PF reset > issued > [251187.204394] i40e 0000:41:00.0: FCoE capability is disabled > > When I try using the NVMUpdatePackage to update the firmware to try and > correct this issue it says: > > [root@cf Linux_x64]# ./nvmupdate64e -u -l -o update.xml -c nvmupdate.cfg > > Intel(R) Ethernet NVM Update Tool > NVMUpdate version 1.24.33.08 > Copyright (C) 2013 - 2015 Intel Corporation. > > Warning: Not supported version of base driver for Intel(R) Ethernet > Converged Network Adapter X710-2 > Warning: Not supported version of base driver for Intel(R) Ethernet > Converged Network Adapter X710 > Config file read. > No devices to update > Post update inventory > > I've tried with both i40e 1.0.11-k (built into RHEL 7.1) and 1.2.38 > (latest from intel) > > Can anyone help me to get basic functionality on these NICs?
Please provide the output of the following: - ethtool -i <i40e_intf_name> - dmesg + grep i40e Thanks, ---------- Greg Rose FreeBSD/NFV PAE Network Division Intel Corporation Desk - 503-712-5048 Any man who afflicts the human race with ideas must be prepared to see them misunderstood. - H. L. Mencken ------------------------------------------------------------------------------ _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
