Hi Ben, >From your ethtool output, I can see that you have:
Link detected: no >From past experiences, this means that you're not running an IES API based >application to manage the card. Can you confirm that you have or don't have an application manager running? Regards, Ngai-Mint Kwan -----Original Message----- From: Ben Greear [mailto:gree...@candelatech.com] Sent: Monday, October 30, 2017 3:12 PM To: e1000-devel list <e1000-devel@lists.sourceforge.net> Subject: [E1000-devel] fm10k cannot get link Hello, We're trying to get an Intel 100G NIC to work, and so far, cannot get it to link. The cable is: X0016I4AO3 QSFP28 10Gtek (any suggestions for a better/different one?) [ 5.022681] fm10k 0000:05:00.0: PCI Express bandwidth of 64GT/s available [ 5.022683] fm10k 0000:05:00.0: (Speed:8.0GT/s, Width: x8, Encoding Loss:<2%, Payload:256B) [ 5.022684] fm10k 0000:05:00.0: 00:e0:ed:54:78:f2 [ 5.027864] fm10k 0000:06:00.0: PCI Express bandwidth of 64GT/s available [ 5.027865] fm10k 0000:06:00.0: (Speed:8.0GT/s, Width: x8, Encoding Loss:<2%, Payload:256B) [ 5.027866] fm10k 0000:06:00.0: 00:e0:ed:54:78:f3 [ 6.057950] Modules linked in: ioatdma(+) shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc ast drm_kms_helper ttm igb drm i2c_algo_bit i2c_core ixgbe mdio hwmon fm10k ptp pps_core dca fjes ipv6 crc_ccitt [ 7.294441] fm10k 0000:05:00.0 eth0.r: renamed from eth0 [ 14.044914] fm10k 0000:05:00.0 eth2: renamed from eth0.r [ 14.107798] fm10k 0000:06:00.0 eth1.r: renamed from eth1 [ 14.178217] fm10k 0000:06:00.0 eth3: renamed from eth1.r [root@lf1005c-is14120020 ~]# ethtool eth3 Settings for eth3: Current message level: 0x00000007 (7) drv probe link Link detected: no [root@lf1005c-is14120020 ~]# uname -a Linux lf1005c-is14120020 4.9.29+ #46 SMP PREEMPT Wed Jul 26 17:48:57 PDT 2017 x86_64 x86_64 x86_64 GNU/Linux [root@lf1005c-is14120020 ~]# ethtool -i eth3 driver: fm10k version: 0.21.2-k firmware-version: bus-info: 0000:06:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: no [root@lf1005c-is14120020 ~]# lspci|grep 06 06:00.0 Ethernet controller: Intel Corporation Device 15a4 Please let me know if you have any suggestions. Thanks, Ben -- Ben Greear <gree...@candelatech.com> Candela Technologies Inc http://www.candelatech.com ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
