Sorry, not enough coffee. Beyond what we are going to be able to answer via 
email, mainly because of all the design details, etc.

Todd Fujinaka
Software Application Engineer
Data Center Group
Intel Corporation
todd.fujin...@intel.com

-----Original Message-----
From: Fujinaka, Todd <todd.fujin...@intel.com> 
Sent: Thursday, June 18, 2020 9:38 AM
To: John H <5snkaz3...@snkmail.com>; E1000-devel@lists.sourceforge.net
Subject: Re: [E1000-devel] ixgbe for 10 GbE SFP+ without CS4227 phy

Can you file a bug directly through your factory rep? I think this is beyond 
what we're going to answer via email.

Todd Fujinaka
Software Application Engineer
Data Center Group
Intel Corporation
todd.fujin...@intel.com

-----Original Message-----
From: John H <5snkaz3...@snkmail.com> 
Sent: Wednesday, June 17, 2020 2:39 PM
To: E1000-devel@lists.sourceforge.net
Subject: [E1000-devel] ixgbe for 10 GbE SFP+ without CS4227 phy

Can the ixgbe driver be used without a CS4227 PHY between the NIC (X552 in this 
case) and the SFP+?  Do you have to configure anything (driver settings, EEPROM 
firmware) to support that?

I do see a CS4227 error message from the driver, but it's not clear if that is 
fatal:

Jun 17 21:36:26 localhost kernel: ixgbe 0000:04:00.0: eth10: CS4227 reset 
failed: -18 Jun 17 21:36:26 localhost kernel: ixgbe 0000:04:00.0: registered 
PHC device on eth10 Jun 17 21:36:26 localhost kernel: ADDRCONF(NETDEV_UP): 
eth10: link is not ready Jun 17 21:36:26 localhost kernel: ixgbe 0000:04:00.0: 
eth10: detected SFP+: 5

However, I am not seeing link (NO-CARRIER).

Here is 'ethtool -m', so it's talking to the SFP+ okay.

$ sudo ethtool -m eth10
        Identifier          : 0x03 (SFP)
        Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
        Connector           : 0x07 (LC)
        Transceiver codes   : 0x10 0x00 0x000x00 0x00 0x00 0x00 0x00
                            :  => 10G Ethernet: 10G Base-SR
        Encoding            : 0x06 (64B/66B)
        BR, Nominal         : 10300MBd
        Rate identifier     : 0x00 (unspecified)
        Length (SMF,km)     : 0km
        Length (SMF)        : 0m
        Length (50um)       : 80m
        Length (62.5um)     : 20m
        Length (Copper)     : 0m
        Length (OM3)        : 300m
        Laser wavelength    : 850nm
        Vendor name         : CISCO-INTEGRA   
        Vendor OUI          : c8:de:51
        Vendor PN           : SFP-10G-SR-S-IO 
        Vendor rev          : 01  



_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel Ethernet, visit 
https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet


_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel Ethernet, visit 
https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet


_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel Ethernet, visit 
https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet

Reply via email to