Le dimanche 24 octobre 2004 à 17:31 +0200, Didier Spaier a écrit :
> Le dim 24/10/2004 à 14:28, Didier Spaier a écrit :

> 1.  Mandrake 10.1 Cooker
> 
> And I wonder if all those 
>   Badness in uhci_map_status at drivers/usb/host/uhci-hcd.c:726
> in the log could have hurt something ? 

That's strange indeed, but no harm to be afraid of : that's only usb
complaining (though a lspcidrake would show better which hardware you
have).

> 2. Slackware 10.0
> 
> It worked fine on Slackware 10.0, kernel 2.4.26 but after replug of the
> modem, DSP was not sent to the driver : I had to issue an eaglectrl -d.

must be hotplug, that do not work the way expected...
perhaps eagleconfig is to be updated to work better with Slackware
10.0 ? (Tux ?)
> Then at first autostart on boot didn't work, though the modem was
> operational. No big deal : I launched the netconf script (provided in
> the distro), asked for a static connection, gave all needed
> informations, i.e. hostname, server name, static IP, netmask, gateway,
> DNS then my connection  was set up for good. Now I've autostart on boot
> and the connection go up after an eaglectrl -d too.

> 3. Slow surf
> 
> Now I,ve got the impression that **surfing is really slow with this
> package**, whatever the distro I use.
> 
> Attn baud123, I commented out the line :
> OPTN1=00000994
> in eagle-usb.conf as had done before Matthieu Castet (see reminder in
> his message on the ML as of Tue, 12 Oct 2004). Surfing seems faster now.
> I hope some other people will try this too.
I've seen this, but I do not have this problem. Only sagem and analog
can answer how this parameter is taken into account.
Can you have a look at http://francois04.free.fr and see whether your
DSLAM is in v1 or v2 ? Just have a look at its name : three letters
means v2, "full name" means v1 (I do not remember where I saw this,
perhaps in an ADUF newsletter...). For me that's v2 but not (yet)
unbundled :-(

I've begun a page about CMV
http://faq.eagle-usb.org/wakka.php?wiki=InfoCMVEn

Thanks a lot for testing
@++
Ben'. aka baud123


Reply via email to