Ok,
The webinterface runs again, the fileserver runs ..... but the windows
network is unable to trace my ebox.
I had a network drive mapped to a users directory of ebox but I am
unable to reastablish the connection.
reaching the files through ssh (winscp) is also not working.
In the 0.097 version i could open ssh in the firewall I can't see this
option in the 0.11 version
anybody any clue ? what I can do ?
thanks in advance
Luc
Luc van Stappershoef wrote:
Thanks Javier,
this worked:
# iptables -I INPUT -p tcp --destination-port 443 -j ACCEPT
# ifconfig eth0 192.168.100.30
did not help
The configuration seemed ok however, through the interface after login
mmmmm....
Anyhow I am happy again, I am hooking it up again to my windows network
Thanks
Javier Uruen Val wrote:
Hi Luc,
Log into the machine and execute
# ifconfig eth0 192.168.100.30
After that try to access from the network connected to eBox to
https://192.168.100.30
I'm assuming eth0 is an interface which is NOT marked as external.
In case you have messed something up with the external interfaces you
can manually enable access in the firewall to the web interface by
executing:
# iptables -I INPUT -p tcp --destination-port 443 -j ACCEPT
Once you have logged in through the web interface, restore your
configuration and save changes.
Drop us a line if you need more help
_______________________________________________
Ebox-user mailing list
[email protected]
https://lists.warp.es/mailman/listinfo/ebox-user
_______________________________________________
Ebox-user mailing list
[email protected]
https://lists.warp.es/mailman/listinfo/ebox-user
_______________________________________________
Ebox-user mailing list
[email protected]
https://lists.warp.es/mailman/listinfo/ebox-user
