Scott, I was using the tightvnc distribution here: ftp://ftp.echogent.com/TightVNC/beta/TightVNC-ew1.82.zip and then replaced the DLL with v1.83 from here: ftp://ftp.echogent.com/EchoWare/beta/Echoware_1.83.zip
Everything was working fine except for the problem I described to you. I think I found the problem. My password was actually 9 characters and I know the VNC protocol only uses the first 8 for authentication. For whatever reason, if I use just the first 8 like it should and change the echoserver password to match, the reconnection problem seems to disappear. What I think is happening, is that the echoserver was looking for all 9 characters in the password and tightvnc would only remember the first 8, as per the protocol. The logs from the echoserver did show that the initial connection was fine, but reconnects failed due to password not found. How's that for beta testing? ;) Cheers, Arthur ________________________________ I've stopped 66,042 spam and fraud messages. You can too! Free trial of spam and fraud protection at http://www.cloudmark.com/sig/?rc=f9r9z -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Scott Best Sent: Saturday, June 10, 2006 2:50 PM To: Arthur Simpatico Cc: echovnc-users@lists.sourceforge.net Subject: Re: [Echovnc-users] Problems with EchoVNC and TightVNC with Echoware Arthur: Hello! Please try out this binary and let me know if it helps. It seems to have fixed the error for my Win2k environment: ftp://ftp.echogent.com/TightVNC/bin/TightVNC_ew1.83.exe thanks, Scott On Jun 10, 2006, at 7:52 AM, Arthur Simpatico wrote: > > Scott, > > Any update on this problem I described last week? > > Cheers > > Arthur > -----Original Message----- > From: Arthur Simpatico [mailto:[EMAIL PROTECTED] > Sent: Saturday, June 03, 2006 7:43 PM > To: 'Scott Best' > Cc: 'echovnc-users@lists.sourceforge.net' > Subject: RE: [Echovnc-users] Problems with EchoVNC and TightVNC with > Echoware > > Scott, > > I'm also trying to use TightVNC (simply because I'd like a hidden icon > and ability to register vnc as a service) and I seem to have the same > sort of issue. > > You should know that my echoServer is on another IP altogether and I > RDP into it in order to check out the connection status while I'm > testing. When I run WinVNC from the TightVNC_ew1.82 distribution > (using v1.83 of Echoware.dll as per another suggestion of yours > recently), I can configure and use an echoServer and it connects just > fine. I verify that the connection is made by refreshing the status > on the echoServer itself. > > Here's the problem, once I close the WinVNC.exe from the tray and > restart it, my settings for the echoServer are still there just fine. > They even show that it's connected! However, when I check on the > echoServer itself, there is no connection. It doesn't reconnect ever > again regardless of how many times I shut it down and restart unless I > remove that server from TightVNC and re-add it back. > > It's a strange problem indeed. > > ________________________________ > I've stopped 64,336 spam and fraud messages. You can too! > Free trial of spam and fraud protection at > http://www.cloudmark.com/sig/?rc=f9r9z > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Scott > Best > Sent: Sunday, May 21, 2006 4:07 PM > To: Ken Molnar > Cc: echovnc-users@lists.sourceforge.net > Subject: Re: [Echovnc-users] Problems with EchoVNC and TightVNC with > Echoware > > Mr.Molnar: > > Hello! I'm trying to reproduce "Problem 1" below. Can you tell me: > > 1. Exactly what version of echoWare DLL is running? > > 2. Exactly what flavor of Windows OS are you using where the problem > can re-appear? > > 3. When you reboot the machine (and it fails to reconnect), is there a > connection from your PC to your echoServer established (i.e., if you > run "netstat -an", can you see an established connection)? > > 4. When you reboot the machine (and it fails to reconnect), do you > reboot to the login prompt, or directly into a default user? > > thanks, > Scott > > On May 20, 2006, at 4:11 PM, Ken Molnar wrote: > >> Hello, >> >> I am having a couple of issues getting an echoware-enabled VNC >> application to work exactly as I need. It seems that each variant I >> have tried using has an issue that prevents it from entirely suiting >> my needs. I need to be able to access a machine whether it is logged >> in or not and then be able to log back out of it after I am done >> doing what I needed to do. I guess I have no choice but to run >> whatever program I use as a service. >> >> Problem 1: >> I decided to try running TightVNC with the echoware version >> overlayed. >> It works great except for one weird issue. It connects to the >> echoserver just fine, even through logins and logouts...until you >> reboot the machine. Once the machine is rebooted, it does not >> connect back up to the echoserver until you log back into the machine >> locally. >> The problem must lie within the echoware portion of the TightVNC >> distribution because I can still access the machine directly via >> port forwarding in the same situation. I tried the beta version of >> the echoware-tightVNC and that did not resolve the issue. I have >> tried it on more than one machine so that does not appear to be the >> issue either. I have also mixed and matched various base versions of >> TightVNC and that didn't seem to help either (though it seems each >> version of TightVNC has its own weird little bugs, varying from >> failure to replace the wallpaper after disconnect to the inability to >> properly associate the locations of desktop and my documents during >> file transfers). After many attempts at getting this solution to >> work, I decided to try something else. This brings me to problem 2. >> >> Problem 2: >> I read something in the archived mailing list here that suggested >> running echoVNC as a service using Microsoft's srvany utility. >> This seemed like a great solution because I prefer UltraVNC over >> TightVNC anyways, and this method would let me choose. I got >> everything up and running and it was free of ALL the bugs I was >> experiencing in the TightVNC variation. I ran into a new bug, >> however. This one is a little weird, though I am pretty sure it has >> something to do with running the application as a service when it >> wasn't designed to do so. I can log into a logged off machine the >> first time, no problem. After I am done, I log the machine out and >> disconnect. Now, I log back into the logged-off machine again. No >> problems here. Now I try to log off the machine before I disconnect >> again. It won't let me. You can't restart, shut down, log off, >> nothin. The only way to get it to log off or restart is to hit ctrl >> alt delete and terminate echovnc.exe. Once you terminate it, you can >> log off or reboot as normal. Only problem with this is that now if >> you log off, you will not be able to connect again because the >> service isn't running. >> >> Does anyone have any idea how to a.) fix the problem with one of the >> two solution methods or b.)know another method that I can try? >> I would really appreciate any help anyone has to offer. This >> echoserver based VNC thing is absolutely awesome. It is wonderful >> not having to configure ports and not having to worry about dynamic >> IPs. >> Thanks in advance, and sorry for the long read. If you need any more >> information please ask. >> >> Thanks again, >> Ken Molnar > > > > ------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, > security? > Get stuff done quickly with pre-integrated technology to make your job > easier Download IBM WebSphere Application Server v.1.0.1 based on > Apache Geronimo http://sel.as-us.falkag.net/sel? > cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > Echovnc-users mailing list > Echovnc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/echovnc-users > > > > _______________________________________________ > Echovnc-users mailing list > Echovnc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/echovnc-users _______________________________________________ Echovnc-users mailing list Echovnc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/echovnc-users _______________________________________________ Echovnc-users mailing list Echovnc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/echovnc-users
