On Mon, 19 Aug 2002 00:05:26 +0100 "Phil Merricks" <[EMAIL PROTECTED]> wrote:
> Redhat 7.3 > linux kernel 2.4.18-3 > VIA Chipset > Fujitsu FDX 310 > Pipex (UK) > Using CVS version of usermode. (0.6?) > > I ran makeconfig manually, as eciconf produced an error when I tried to > use that. > > Here's what I typed (as root): > > ./makeconfig [EMAIL PROTECTED] password /usr/local/bin/pppoeci > 158.43.240.4 158.43.240.3 0 38 0e600101 09150102 > /etc/eciadsl/eci_wan3.dmt.bin > > When I run ./startmodem, here's what I get: > > test : /usr/local/bin/eci-load1 > vid/pid read from /etc/eciadsl/vidpid: 0e60/0101 0915/0102 > Init modem ... > Load Firmware ... > read 3160 bytes instead of 50672 > can't read block > ECI Load 1 : failed! > Failed to load firmware > Hi Phil, The only solution is to extract your firmware under windows. To do that install Snoopy USB sniffer (http://usbsnoop.sf.net) and run it until LED stop blinking (only synchronization, without internet connection). Save your file and return under Linux. Then convert file with eci_uc.pl (to produce firmware with the expected format). Edit startmodem and modify any occurence of "eci_firm_kit_wanadoo.bin" with the name of the file you built. Good luck Phil, the harder is to make sniffer works well under Windows... PS: yesterday I didn't suggest you anything, but after a good night, ideas come again :) Cordialement / Best regards Sebastien. http://flashcode.free.fr AIM: FlashCode AIM email: [EMAIL PROTECTED] ICQ: 160677660 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Driver Linux pour modem ECI ADSL USB: http://flashcode.free.fr/linux Archives de cette liste de diffusion: http://liste.eci.free.fr Pour se desinscrire: mailto:[EMAIL PROTECTED]?subject=unsubscribe
