Gilles Espinasse ha scritto: > > ----- Original Message ----- > From: "Alessio Cecchi" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, November 01, 2005 11:06 PM > Subject: [ECI] Problem with D-Link DSL-200 rev. B1 > > >> Hello >> >> i have some problem with my ADSL modem "D-Link DSL-200 rev. B1" and > eciadsl >> 0.11b1 and 0.11. I'm unable to connect to internet. My linux is IpCop, > when >> i try to connect i see in the log: >> >> Nov 1 22:12:37 ipguard kernel: hub.c: new USB device 00:07.3-1, assigned >> address 3 >> Nov 1 22:12:37 ipguard kernel: usb.c: USB device 3 (vend/prod >> 0x2001/0x5100) is not claimed by any active driver. >> Nov 1 22:12:48 ipguard ipcop: Dialling ADSL. >> Nov 1 22:13:24 ipguard pppd[11019]: pppd 2.4.2 started by root, uid 0 >> Nov 1 22:13:24 ipguard pppd[11019]: using channel 22 >> Nov 1 22:13:24 ipguard pppd[11019]: Using interface ppp0 >> Nov 1 22:13:24 ipguard pppd[11019]: Connect: ppp0 <--> /dev/pts/1 >> Nov 1 22:13:24 ipguard pppd[11019]: Script /usr/sbin/eciadsl-pppoeci -v 2 >> -alt 1 -vpi 8 -vci 35 -vendor 0x2001 -product 0x5100 -mode VCM_RFC2364 >> finished (pid 11020), status = 0xf5 >> Nov 1 22:13:24 ipguard pppd[11019]: Modem hangup >> Nov 1 22:13:24 ipguard pppd[11019]: Connection terminated. >> Nov 1 22:13:24 ipguard pppd[11019]: Exit. >> >> I have read the FAQ but i don't think is pap or chap problem, if i use >> another modem ("DSL-200" but no rev B1) i can connect to internet. >> >> I have try many sinch.bin, and with -v 2: >> > You could check the verbose checkbox on pppsetup.cgi page. > It should show lcp negociation and authentification. > If nothing more is displayed, I am afraid it may be a sync problem and you > should try with another synch .bin. > Since I have not yet managed a way to test many synch in a loop, it is > painfull to test. > > You may try too to directly run from command line > /etc/rc.d/rc.eciadsl start > It will show you more details about the sync process. > > You could play too with rc.eciadsl stop and rc.eciadsl cleanup wich will > fully reset usb and the modem. > > Gilles
Many thanks Gilles, verbose is already checked, no LCP are showed, when i click on connect i see directly "... pppd Modem hangup ..." I have try from console with /etc/rc.d/rc.eciadsl stop/cleanup/start, the modem get the synch but it is not connected. Could i try to make my synch.bin from windows? -- Alessio Cecchi ++ www.skye.it =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- EciAdsl Linux driver: http://eciadsl.flashtux.org EciAdsl ML archives: http://liste.eci.free.fr To unsubscribe: mailto:[EMAIL PROTECTED]
