Scrive Andrew Lunn <[EMAIL PROTECTED]>: > > -I- Send File M:/main.bin at address 0x100000 > > -I- File size = 24820 byte(s) > > (Desktop) 1 % eval FLASH::ScriptGPNMV 4 > > -I- Boot from Flash selected > > The address is O.K. > > So try one of the standard tests and see if it outputs anything on the > serial ports. 38400 baud. I think the DBG port is used by default, but > i could be wrong. > > Andrew > Hooray! it works, i tried with several test and all off them pass and output on dbgu port at 38400baud. Maybe then i'm doing something wrong in compilation? i've used Build_makefile to generate the makefile. however i'll take a look at the tests code. Thanks again Andrea
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
