Scrive Andrea Visinoni <[EMAIL PROTECTED]>: > Scrive Andrew Lunn <[EMAIL PROTECTED]>: > > > > -I- Send File M:/main.bin at address 0x100000 > > > -I- File size = 24820 byte(s) > > > (Desktop) 1 % eval FLASH::ScriptGPNMV 4 > > > -I- Boot from Flash selected > > > > The address is O.K. > > > > So try one of the standard tests and see if it outputs anything on the > > serial ports. 38400 baud. I think the DBG port is used by default, but > > i could be wrong. > > > > Andrew > > > Hooray! it works, i tried with several test and all off them pass and output > on > dbgu port at 38400baud. > Maybe then i'm doing something wrong in compilation? i've used Build_makefile > to > generate the makefile. > however i'll take a look at the tests code. > Thanks again > Andrea I also tried to put the code you provide me to light the led, inside the basic.c test code, but nothing appens. Andrea
---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
