-----Original Message----- From: Gary Thomas [mailto:[EMAIL PROTECTED] Sent: Donnerstag, 1. November 2007 13:40 To: EXTERNAL Gladis Olaf (Praktikant; CR/AEM) Cc: [email protected] Subject: Re: [ECOS] Can't connect properly (TCP/IP)
>How are you connecting to the board via GDB? Are you using >a JTAG/ICE? or using RedBoot? I read the manual for the node, and it is an onboard GDB stub. I don't know exactly what this is. I am connected via the ethereal port. Using the Gnu Insight Debugger. > >If you are using RedBoot, you should try connecting via the serial >port and not the network. Then, once the program fails (as above), >you can figure out why, get a backtrace, etc. I am new with eCos, can you tell me, or show me one website, how to debug via serial port, or with redboot? > >The fact that you can only trace your code to the 'connect()' call >is not hard to understand. This function will cause the calling >thread to block until the network connection has been made. A *lot* >can happen while you are in this function! Now I have to check why it take so long, and why my server recognize an established connection. Thanks in advance. Olaf Gladis > > > >-- >------------------------------------------------------------ >Gary Thomas | Consulting for the >MLB Associates | Embedded world >------------------------------------------------------------ > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
