--- On Tue, 11/25/08, Gary Thomas <[EMAIL PROTECTED]> wrote:
> From: Gary Thomas <[EMAIL PROTECTED]>
> Subject: Re: [ECOS] Redboot hung after fconfig update (y/n)? y
> To: [EMAIL PROTECTED]
> Cc: "eCos Disuss" <[email protected]>
> Date: Tuesday, November 25, 2008, 3:58 AM
> krj wrote:
> >
> > I am using Micron DDR MT46H32M32LF on i.mx31 platform.
> After running redboot, I am seeing a hang after the
> following message:
> >
> > Update RedBoot hon-volatile configuration - continue
> (y/n)? y
> > "... Read from 0x07ee0000-0x07eff000 at
> 0x000800000: . "
>
> Very little to go on and oh, so many possibilities...
>
> First of all, this platform is not in the public tree, so
> there's
> not much we can say about it. You probably need to talk to
> FreeScale about your issues.
>
> Also, this device is NAND (hence the 'Read from'
> message)
> which also complicates life. Is it the same device as what
> the [default] FreeScale platform uses?
>
> Finally, you didn't say if the FLASH functions work at
> all.
> For example, can you run 'fc -l' or 'fi li'
> or 'fi cr'?
>
>
The nand flash functions do work. But you are correct, much of the code and
issues may be related to the software provided outside the public tree and is
not applicable to this forum.
There is recent news, however, concerning the use of Micron DDR MT46H32M32LF on
i.mx31. Perhaps this component is not completely supported or on the do not use
list.
cheers
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
> --
> Before posting, please read the FAQ:
> http://ecos.sourceware.org/fom/ecos
> and search the list archive:
> http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
