hello, everyone, i downloaded the Prebuilt RedBoot binaries for Atmel AT91SAM7S. But After i burn the redboot_rom.bin into at91sam7s256's flash at address 0x100000, it can't startup when power on. The datasheet said 0x100000 is the beginning address of Flash. So i burn it there. I use the readelf command to find the redboot_rom.elf say its entry point is 0x100040, But when i burn redboot_rom.bin there, it can't startup either. Can you tell me where should i burn the redboot_rom.bin, since the redboot_rom.elf is too large to burn. Thanks.
-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
