Typically ROM startup is used for building RedBoot. make sure you startup is ROM.
wb ning wrote: > > hello, everyone, i downloaded the Prebuilt RedBoot binaries for Atmel > AT91SAM7S. But After i burn the redboot_rom.bin into at91sam7s256's > flash at address 0x100000, it can't startup when power on. The > datasheet said 0x100000 is the beginning address of Flash. So i burn > it there. I use the readelf command to find the redboot_rom.elf say > its entry point is 0x100040, But when i burn redboot_rom.bin there, it > can't startup either. Can you tell me where should i burn the > redboot_rom.bin, since the redboot_rom.elf is too large to burn. > Thanks. > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > > > -- View this message in context: http://www.nabble.com/which-address-of-FLASH-should-at91sam7s-redboot-burn-to---tp24087199p24105870.html Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
