Hello, I am new to eCos/Redboot and have some problems with using "go" command with RedBoot installed on PowerPC MPC5566. I have found similar problems reported by others but with no luck in fixing it. Redboot was built based on eCos 3.0 downloaded from mercurial repository. I am using gcc tools 4.3.2. Redboot bulids and runs on target -I can enter commands from Terminal. However when I load a simple code to RAM (i.e. using "lo -r -m xmodem 0x40004000" command) I can not execute it with "go". When in config tool "Work with a ROM monitor" and "Behave as a ROM monitor" are checked and "go 0x40004000" command is used, RedBoot seems to reset. When "Work with a ROM monitor" is not checked, RedBoot hangs. I have tried many different configurations with no result. Any help appreciated.
Jakub -- View this message in context: http://sourceware-org.1504.n7.nabble.com/go-command-on-MPC55xx-question-tp217107.html Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
