Jakub, I am a newbie, so I might get corrected by others...
I am using arm cortex m... but things should be similar. When you build the app, I don't think you want Behave as a ROM monitor. I think Work with a ROM monitor is all you need. Also, I just type go and my app runs, but it hangs when main exits. I don't know if that is typical behavior or not. Mike On Dec 20, 2012, at 8:11 AM, kuba <gute...@wp.pl> wrote: > Hello, > > I am new to eCos/Redboot and have some problems with using "go" command with > RedBoot installed on PowerPC MPC5566. I have found similar problems reported > by others but with no luck in fixing it. Redboot was built based on eCos 3.0 > downloaded from mercurial repository. I am using gcc tools 4.3.2. Redboot > bulids and runs on target -I can enter commands from Terminal. However when > I load a simple code to RAM (i.e. using "lo -r -m xmodem 0x40004000" > command) I can not execute it with "go". When in config tool "Work with a > ROM monitor" and "Behave as a ROM monitor" are checked and "go 0x40004000" > command is used, RedBoot seems to reset. When "Work with a ROM monitor" is > not checked, RedBoot hangs. I have tried many different configurations with > no result. Any help appreciated. > > Jakub > > > > -- > View this message in context: > http://sourceware-org.1504.n7.nabble.com/go-command-on-MPC55xx-question-tp217107.html > Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com. > > -- > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
