Hi Mike, Am using the same build flag that you mentioned and getting the build error - 'Section-Alignment and File-Alignment do not match :<runtime module path>.ffs'
[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER] MSFT:*_*_*_DLINK_FLAGS = /ALIGN:4096 Thanks, Baranee > -----Original Message----- > From: Kinney, Michael D [mailto:[email protected]] > Sent: Tuesday, December 15, 2015 6:57 PM > To: Anbazhagan, Baraneedharan <[email protected]>; Yao, Jiewen > <[email protected]>; Laszlo Ersek <[email protected]>; Kinney, Michael D > <[email protected]> > Cc: Hamel, Lee M <[email protected]>; Barlow, Dallas > <[email protected]>; [email protected] <[email protected]> > Subject: RE: [edk2] InsertImageRecord and Section Alignment > > Baranee, > > What build flags are you using? > > Most platforms can add the following in their DSC file to get this to work > form > VS20xx tool chains. > > [BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER] > MSFT:*_*_*_DLINK_FLAGS = /ALIGN:4096 > > Thanks, > > Mike > > > -----Original Message----- > > From: edk2-devel [mailto:[email protected]] On Behalf Of > > Anbazhagan, Baraneedharan > > Sent: Tuesday, December 15, 2015 8:31 AM > > To: Kinney, Michael D <[email protected]>; Yao, Jiewen > > <[email protected]>; Laszlo Ersek <[email protected]> > > Cc: Hamel, Lee M <[email protected]>; Barlow, Dallas > > <[email protected]>; [email protected] <edk2- > > [email protected]> > > Subject: Re: [edk2] InsertImageRecord and Section Alignment > > > > Hi, > > When I tried to enable section alignment in DSC for Runtime modules, > > am getting a build error that section alignment and file alignment > > doesn't match(GenFvInternalLib.c). Am using > > VS2012x86 build tools. Whether any other build flag needs to be set? > > > > - Baranee > > > > > -----Original Message----- > > > From: edk2-devel [mailto:[email protected]] On > > Behalf Of Kinney, > > > Michael D > > > Sent: Monday, December 07, 2015 8:23 PM > > > To: Yao, Jiewen; Laszlo Ersek; Kinney, Michael D > > > Cc: Hamel, Lee M; [email protected] > > > Subject: Re: [edk2] InsertImageRecord and Section Alignment > > > > > > Jiewen, > > > > > > I agree that is a good place to put the error message. > > > > > > Mike > > > > > > > -----Original Message----- > > > > From: Yao, Jiewen > > > > Sent: Sunday, December 6, 2015 7:06 PM > > > > To: Kinney, Michael D <[email protected]>; Laszlo > > Ersek > > > > <[email protected]>; Kinney, Michael D > > <[email protected]> > > > > Cc: Hamel, Lee M <[email protected]>; edk2- > > [email protected] > > > > <[email protected]> > > > > Subject: RE: [edk2] InsertImageRecord and Section Alignment > > > > > > > > Hi Mike > > > > I agree that we can change this from ERROR to WARNING, and > > only add 1 ERROR > > > message. > > > > > > > > However, the > > \MdeModulePkg\Universal\PropertiesTableAttributesDxe > > > > module is optional module, because a platform may use its > > own module to set > > > attributes for ACPINvs or reserved. > > > > > > > > How about we add error message when install this table in > > > DxeCore.InstallPropertiesTable(). > > > > if ((mPropertiesTable.MemoryProtectionAttribute & > > > > > > EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA) > > == > > > 0) { > > > > DEBUG ((EFI_D_ERROR, "MemoryProtectionAttribute > > > NON_EXECUTABLE_PE_DATA not set\n")); <== New line > > > > return ; > > > > } > > > > > > > > Thank you > > > > Yao Jiewen > > > > > > > > -----Original Message----- > > > > From: edk2-devel [mailto:[email protected]] On > > Behalf Of > > > > Kinney, Michael D > > > > Sent: Friday, December 04, 2015 8:27 AM > > > > To: Laszlo Ersek; Kinney, Michael D > > > > Cc: Hamel, Lee M; [email protected] > > > > Subject: Re: [edk2] InsertImageRecord and Section Alignment > > > > > > > > Laszlo, > > > > > > > > That is a good question. If a platform requires > > > > > > EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA > > to > > > be set, then it is an error condition. That is why it is an > > error message and not a > > > warning message. > > > > > > > > We could consider changing this specific message to a > > warning, and add > > > > one error message from the > > > > \MdeModulePkg\Universal\PropertiesTableAttributesDxe module. > > That way, only > > > platforms that include this module will get an error message > > if any runtime modules > > > for not use 4KB aligned. > > > > > > > > Mike > > > > > > > > > -----Original Message----- > > > > > From: Laszlo Ersek [mailto:[email protected]] > > > > > Sent: Thursday, December 3, 2015 3:36 PM > > > > > To: Kinney, Michael D <[email protected]> > > > > > Cc: Hamel, Lee M <[email protected]>; edk2- > > [email protected] > > > > > <[email protected]> > > > > > Subject: Re: [edk2] InsertImageRecord and Section > > Alignment > > > > > > > > > > On 12/03/15 21:16, Kinney, Michael D wrote: > > > > > > Lee, > > > > > > > > > > > > It is a feature from UEFI Specification 2.5 - Section > > 4.6 - > > > > > > EFI_PROPERTIES_TABLE > > > > > > > > > > > > In order to set the > > > > > > > > EFI_PROPERTIES_RUNTIME_MEMORY_PROTECTION_NON_EXECUTABLE_PE_DATA > > > > > > bit, runtime drivers need to be built so their PE/COFF > > code and > > > > > > data sections do not share the same 4KB page. > > > > > > > > > > > > The log message you are seeing is not an error. It is a > > warning > > > > > > message that a runtime driver was loaded that does not > > meet the > > > > > > requirements to set this bit. > > > > > > > > > > Should the message be downgraded from EFI_D_ERROR to > > EFI_D_WARN > > > > > ("MdeModulePkg/Core/Dxe/Misc/PropertiesTable.c")? > > > > > > > > > > Thanks > > > > > Laszlo > > > > > > > > > > > > > > > > > Mike > > > > > > > > > > > >> -----Original Message----- > > > > > >> From: Hamel, Lee M > > > > > >> Sent: Thursday, December 3, 2015 11:19 AM > > > > > >> To: Kinney, Michael D <[email protected]>; > > > > > >> [email protected] > > > > > >> Subject: RE: InsertImageRecord and Section Alignment > > > > > >> > > > > > >> Thanks for the solution. Any idea why my code was fine > > before > > > > > >> and now it's not (the design change reason, not that > > > > > >> tools_def.txt changed)? I'm trying to understand why a > > change > > > > > >> was made that > > > > caused the problem. > > > > > >> > > > > > >> -----Original Message----- > > > > > >> From: Kinney, Michael D > > > > > >> Sent: Thursday, December 03, 2015 11:13 AM > > > > > >> To: Hamel, Lee M <[email protected]>; > > > > > >> [email protected]; Kinney, Michael D > > > > > >> <[email protected]> > > > > > >> Subject: RE: InsertImageRecord and Section Alignment > > > > > >> > > > > > >> Lee, > > > > > >> > > > > > >> You can fix this by adding the following to the DSC > > file to force modules of type > > > DXE_RUNTIME_DRIVER to use 4KB alignment. > > > > > >> > > > > > >> [BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER] > > > > > >> MSFT:*_*_*_DLINK_FLAGS = /ALIGN:4096 > > > > > >> > > > > > >> Mike > > > > > >> > > > > > >>> -----Original Message----- > > > > > >>> From: edk2-devel [mailto:edk2-devel- > > [email protected]] On > > > > > >>> Behalf Of Hamel, Lee M > > > > > >>> Sent: Thursday, December 3, 2015 10:57 AM > > > > > >>> To: [email protected] > > > > > >>> Subject: [edk2] InsertImageRecord and Section > > Alignment > > > > > >>> > > > > > >>> I recently synced to a newer UDK 2015 and now get this > > serial output many > > > times for different images: > > > > > >>> > > > > > >>> !!!!!!!! InsertImageRecord - Section Alignment(0x20) > > is not 4K !!!!!!!! > > > > > >>> !!!!!!!! Image - <some > > > > > >>> path>\ReportStatusCodeRouterRuntimeDxe.pdb > > > > > >>> > > > > > >>> Has anyone seen this problem when syncing to UDK 2015? > > I am using Visual > > > Studio 2010 to build. > > > > > >>> > > > > > >>> _______________________________________________ > > > > > >>> edk2-devel mailing list > > > > > >>> [email protected] > > > > > >>> https://lists.01.org/mailman/listinfo/edk2-devel > > > > > > _______________________________________________ > > > > > > edk2-devel mailing list > > > > > > [email protected] > > > > > > https://lists.01.org/mailman/listinfo/edk2-devel > > > > > > > > > > > > > > _______________________________________________ > > > > edk2-devel mailing list > > > > [email protected] > > > > https://lists.01.org/mailman/listinfo/edk2-devel > > > _______________________________________________ > > > edk2-devel mailing list > > > [email protected] > > > https://lists.01.org/mailman/listinfo/edk2-devel > > _______________________________________________ > > edk2-devel mailing list > > [email protected] > > https://lists.01.org/mailman/listinfo/edk2-devel _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
