PL061Initialize() did not actually do anything other than call PL061Identify() - so cut out the middle man.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Leif Lindholm <[email protected]> --- ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c | 27 +------------------------ 1 file changed, 1 insertion(+), 26 deletions(-) diff --git a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c index c8125fd..45897ca 100644 --- a/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c +++ b/ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.c @@ -57,31 +57,6 @@ PL061Identify ( return EFI_SUCCESS; } -EFI_STATUS -PL061Initialize ( - VOID - ) -{ - EFI_STATUS Status; - - // Check if the PL061 GPIO module exists on board - Status = PL061Identify(); - if (EFI_ERROR (Status)) { - Status = EFI_DEVICE_ERROR; - goto EXIT; - } - - // Do other hardware initialisation things here as required - - // Disable Interrupts - //if (MmioRead8 (PL061_GPIO_IE_REG) != 0) { - // // Ensure interrupts are disabled - //} - - EXIT: - return Status; -} - /** Routine Description: @@ -298,7 +273,7 @@ PL061InstallProtocol ( // ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEmbeddedGpioProtocolGuid); - Status = PL061Initialize(); + Status = PL061Identify(); if (EFI_ERROR(Status)) { return EFI_DEVICE_ERROR; } -- 2.1.4 _______________________________________________ edk2-devel mailing list [email protected] https://lists.01.org/mailman/listinfo/edk2-devel
