On Wed, Jul 20, 2016 at 01:10:47PM +0000, Alcantara, Paulo wrote: > Hi Gary, > > I usually set the TOOL_CHAIN_TAG to GCC49 when I want to build it with GCC5+. > AFAIC there's no tags for versions 5 and 6. > Hi Paulo,
I actually modified the build script to use GCC49 instead of GCC46. The problem is that there are too many compilation errors so I wonder if anyone really uses gcc to compile the Minnowboard firmware or it only can be compiled with gcc 4.6. Thanks, Gary Lin > Paulo > > -----Original Message----- > From: edk2-devel [mailto:edk2-devel-boun...@lists.01.org] On Behalf Of Gary > Lin > Sent: quarta-feira, 20 de julho de 2016 07:24 > To: edk2-devel@lists.01.org > Subject: [edk2] What's the status of Minnowboard MAX/Turbot gcc build? > > Hi, > > I recently got a Minnowboard Turbot and would like to build the firmware on > my own. I downloaded the 0.92 binary objects and tried to build the firmware > with Vlv2TbltDevicePkg/Build_IFWI.sh. However, the build script spitted tons > of errors like "set but not used variable" or "multiple definition". Some of > them are real while some of them are actually the false-positive of > ASSERT_EFI_ERROR. Besides, in the build script, it specifies the build target > as GCC46 which is old. My build machine runs openSUSE Tumbleweed which is > using gcc 6.1.1. Before I really dive into it, just want to know: Can the > firmware be compiled with gcc? > > Thanks, > > Gary Lin _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
